Many car manufacturers employ 6/8″ speakers in their vehicles because they are easier to put in compact locations than 69″ speakers while delivering equivalent sound quality. Ford (and its subsidiaries) used 6/8′′ in a large number of its automobiles. However, some of the factory speakers in your car are of poor quality and may not function as well as you might expect. They could also be old and damaged, sounding like a blown speaker. When you upgrade your head unit or add a high-quality subwoofer or other speakers, this is especially important. Factory speakers might also sound weak or tinny, and lack the frequency range needed to make your system update sound clean and impactful.
To enhance your system, there are a number of good 6×8 speakers on the car speakers market. If you truly want to improve the performance of your automobile audio system, though, you should look for the greatest speakers rather than the cheapest. We spent time sorting through a wide range of goods to compile this list of 6″ speakers that we believe will deliver excellent sound quality from your factory or aftermarket head unit.
Table of Contents
Rockford Fosgate Punch P1683 6 x 8-Inches Full Range 3-Way Speakers
- The Punch P1683 is an impressive 3-way full-range speaker designed for...
- The P1683 6”x8” 4-Ohm black speakers come as a pair, have a power...
- Featuring a PEI dome tweeter with built-in crossover and injection molded...
So, let’s start with the Rockford Fosgate P1683 Punch in our assessment of the finest 6/8 speakers. These are tri-directional speakers. They have a 90dB sensitivity and an RMS power output of 65 watts with a peak power of 130 watts. 65-24,000 Hz is the frequency response. A tweeter crossover with PEI dome is built-in. The speakers also have a mineral-filled and injection-molded polypropylene cone. The speaker surrounds are constructed of butyl rubber, and the speakers are mounted using their own unique FlexFit method.
Rockford is a well-known brand that has been manufacturing automotive speakers, subwoofers, and amplifiers for over 40 years. They make some high-quality, mid-priced automotive speakers, and the latest Fosgate speakers are no exception. They are securely fastened. They also have polypropylene cones and butyl rubber surrounds, making them a tough and long-lasting pair of automobile speakers.
With an RMS power of 65 watts, these woofer cone materials will be loud enough for the vast majority of buyers. The stereo system produce a crisp, accurate sound that is especially robust at the higher end. Although the mids are well covered, the bass is a tad thin. These aftermarket speakers are excellent if you don’t listen to music that is heavily bass-driven. If you want your car audio system bass to have more punch, consider installing a larger speaker, a three-way component system, or a subwoofer. These are the Best 6×8 Speakers in 2023.
Pioneer TS-A6880F 6 x 8 350 Watts Max Power A-Series 4-Way
No products found.
A four-way speaker, the Pioneer TS-A6880F. The component speaker features the same coaxial-style architecture as the two-way speakers, but the main driver has twin 11mm tweeters attached on it for better sound quality. This four-way method is intended to provide a more defined greater range while also reducing the amount of wiring required for installation.
They have an 88dB sensitivity and an RMS power output of 80 watts with a peak power of 350 watts. 34-34,000 Hz is the frequency response. The woofers are constructed of carbon and MICA reinforced material, which is a high-quality sound and durability material. The surrounds are constructed of an elastic polymer, and the 1 5/8″ cellulose fiber cone midrange driver is coaxially mounted.
In 1937, Pioneer released their first speaker. That was a long time ago, and their market endurance is matched by their reputation for manufacturing high-quality build quality component speakers. It’s simple to see why the firm has become one of the top players in the vehicle audio market. The A-series speaker line is well-known for its balanced sound and high quality.
The TS-A6880F is one of the series’ mid-priced speakers, and it provides a lot for a small price. This speaker size has a deeper and more punchy bass than many other speakers in this price range. The bass is more than sufficient. Lower frequencies sound audible without being murky. The mids are adequately taken care of and vocals sound pleasant and clear way coaxial speakers. Best of all, twin 11″ tweeters handle the top end of the spectrum mounting depth, resulting in a richly textured sound with excellent clarity audio quality. These are the Best 6×8 Speaker in 2023.
Rockford Fosgate R168X2 Prime 6 x 8 Inches Full Range Coaxial Speaker
- The Prime R168X2 is a 6” x 8” 2-way full-range speaker rated at 55...
- The R168X2 6”x8” 4-Ohm black speakers come as a pair, including...
- Perfect for replacing factory speakers, the 6”x8” feature polypropylene...
The R168X2 Prime is a two-way coaxial speaker from Rockford. They have an 87dB sensitivity and an RMS power output of 55 watts with a peak power of 110 watts. 51-20,000 Hz is the frequency response. A silk dome tweeter with an integrated crossover is included. The speakers have a polypropylene injection molded cone, and the speaker surrounds are made of butyl rubber, just like the speakers we just evaluated. Speakers are fitted using their patented FlexFit technology.
The good news is that the Rockford R168X2 is as good as some of their more expensive speakers in terms of sound quality. Despite the fact that the R168X2 speakers are affordable, they are well-built. Furthermore, they are made of the same tough and durable materials as their more expensive counterparts. In most situations, the RMS power of 55 watts be suffice. The trebles are crisp and clear, and the sound is correct. The speakers were at their best at this point. Although the bass wasn’t as loud or punchy as we’d hoped, it was still acceptable. The mids were not as defined as the Rockford Fosgate P1683 Punch, which we previously examined.
The Rockford R168X2 had a clear and crisp tone overall. Although the lower mids and bass could have been better portrayed, these speakers perform admirably for a two-way coaxial budget setup. The Rockford R168X2 is a good choice for those on a tight budget who want to improve their original car speakers quickly and cheaply.
Infinity REF8622CFX 6X8 / 5X7 360W Reference Series 2-Way Coaxial Car Speaker
- 3.0 ohms Impedance, edge-driven, textile tweeters
- High quality product
- Manufactured in United States
A two-way speaker system from Infinity is the REF8622CFX 6X8. They have a 93dB sensitivity and an RMS power output of 60 watts with a peak power of 180 watts. The frequency response ranges between 49 and 21,000 Hz.
A 1′ textile dome tweeter is coaxially attached. Textile tweeters are a fantastic alternative for smoother upper frequency reproduction. The disadvantage is that they can’t reach the same highs as ceramic or titanium. They are also less durable. They have a 6″ Plus One+ polypropylene woofer cone with surround, as well as hi-roll rubber surrounds on the speakers. The speakers only have a 3 ohm impedance rating. These are not direct fit speakers, therefore some additional work may be required to achieve a proper fit.
The wonderful thing about these best 6″ x 8″ speakers is that they’ve managed to expand the surface area of the woofer within the normal 6″ x 8″ configuration thanks to their smart coaxial Plus One+ design. At lower frequencies, this smart design has helped to boost output and sensitivity. As a result, the low-end sound quality has improved.
These speakers have very low distortion, which is impressive given their mid-range pricing. Furthermore, the usage of a cloth over a plastic dome produces a pleasant smooth sound. They’re bright without being strident, and they don’t become old listening to them for long periods of time.
CERWIN VEGA V468 6-Inch x 8-Inch 400 Watts Max/75Watts RMS Power Handling 2-Way Coaxial Speaker Set
- Cerwin Vega Legacy Design: Immerse yourself in the renowned heritage of...
- High-Performance 2-Way Component Set: Upgrade your car speaker system with...
- Premium Sound Quality: Experience superior audio with the low-resonant deep...
The Cerwin Vega V468 is a coaxial two-way speaker. They have a 94dB sensitivity and an RMS power output of 75 watts with a peak power of 400 watts. That is a tremendous amount of power. The frequency response ranges between 55 and 20,000 Hz. A 1″ ceramic tweeter is included with the speakers. This is installed in a mica fiber composite 6″ x 8″ woofer coaxially. The Vega red rubber surround on the ans is quite distinctive and appealing.
These gadgets can go loud — extremely loud – with peak output up to 400 watts. They easily transform the power of your amplifier into noise thanks to their high sensitivity response of 94 dB. Of course, we all know that power without control is pointless. The good news is that the curved cone design aids in maintaining order. They generate superb low mids and crisp, powerful bass in the process, even at high levels.
The highs are also bright. They, too, are capable of performing at high volumes while remaining crisp, clear, and brilliant without turning shrill. Cerwin Vega has delivered a powerful and persuasive offering.
JBL CLUB 8620 5×7/6×8 2-Way Coaxial Speaker System
- 5x7"/ 6x8" 2-Way coaxial speaker system
- Peak: 330 watts per pair/ 165 watts each
- Rms: 110 watts per pair/ 55 watts each 3 ohm impedance
When it comes to updating components in your vehicle’s audio system, JBL 5×7 Speakers is always a good choice. The manufacturer provides a high-quality 6×8 speaker with a peak power of 165 watts and an RMS power of 55 watts for this model. The model is a fantastic alternative for individuals looking for a dependable and long-lasting replacement, since it can last for many years without needing to be modified.
The speaker can be installed in a variety of automobiles. There are no further accessories or adjustments required for installation. The speaker has a polypropylene cone that offers consistent high performance. The frequency response ranges from 65 hertz to 20 kilohertz, and the sensitivity is 93 decibels. Overall, JBL provides a decent speaker that most consumers will be happy with, especially given the low price.
Despite the speaker’s great overall performance, some drivers will be disappointed by the lack of bass. If you wish to improve your ride, you may want to consider other options. Also, when combined with an amplifier, the speaker comes to life, so you might want to spend a little more money for a greater experience.
Pyle PL683BL 6×8 Car Speakers
- 70Hz - 20Khz FREQUENCY RESPONSE: Pyle, 6” x 8” three way sound speaker...
- 4-OHM IMPEDANCE: This car speaker has 4-ohm impedance rating that...
- 1'' ASV VOICE COIL: Pyle car sound speaker system is capable of 1''...
The Pyle model may be just what you need to update your automobile sound system if you’re seeking for mid-range speakers. These speakers have a peak output of 360 watts and an RMS power of 180 watts. The frequency response ranges from 70 hertz to 20 kHz, with a sensitivity value of 91 dB. In light of this, the speakers deliver just enough power and sound quality to make listening to music enjoyable.
These speakers have a sleek look in addition to superb sound quality. The blue cones make the interior of the car stand out, especially at night. They’re also designed to endure high operating temperatures and last longer. In terms of installation, these 6×8 speakers are simple to install in a range of automobiles. Grills, cables, and mounting hardware are included in the package, making the installation process simple.
The speakers strike a good balance between price and sound quality, but they’re not going to blast your windows out. Because they lack the power to amplify sound at high volumes, you should think about your demands before purchasing. For those who appreciate good old funk and jazz, the bass is also too low.
Kenwood Excelon KFC-X683C 6×8 Inch 2-Way Custom Fit Speaker System
The Kenwood KFC speakers produce a broad, rich sound that elevates music listening in your vehicle to new heights. The speakers provide dependable performance and a long lifespan thanks to the high-quality materials used. They also have a sleek and stylish appearance, making them an ideal accent to any vehicle’s interior.
The 120 watt RMS and 180 watt peak output are unquestionably the product’s highlights. The frequency response of 80 to 21,000 hertz is likewise rather excellent. The speakers produce clear, crisp audio with good lows, mids, and highs. The high-quality coils improve overall performance, while the butyl rubber surround minimizes distortion. Furthermore, these speakers are simple to install and require no adjustments.
The speakers may prove to be more expensive than other types, despite their low price. If you’re looking for a cheap pair of speakers, look through the rest of our selection. If you still think these speakers are perfect for your needs, we recommend spending a few extra dollars on an amplifier. It will significantly increase their capacity.
Best 6×8 Speakers Buyers Guide
Power
The highest possible productivity will always be crucial. Because of the limitations imposed by 6″ x 8″ speakers’ dimensions, there isn’t much variation outside of 300 to 400 watts of peak output.
Look for a system with a greater dB sensitivity rating if you want something with a high output. These will be better able to turn your receiver’s signal into additional noise.
Level of Component Quality
The components’ quality will often determine the sound’s quality. However, if you’re searching for a higher quality speaker, there are a few things you should look for. There are producers who consistently squeeze more from less, and good quality design also contributes to this.
Woofers
Polypropylene combined with a substance like Mica is a strong option for woofers in terms of sound and longevity. When correctly crafted, other materials like Kevlar coated paper can also be used quite successfully.
Tweeters
Titanium or ceramic materials for tweeters generate the loudest, most distinct sound. Silk tweeters have exceptional clarity and smoothness but are less bright. In addition to being less effective, piezo, mylar, and PEI are all more affordable choices.
A useful material for speaker surrounds is butyl rubber. It provides good durability and makes driving easier. Foam, for example, can be used, but it must be of the finest quality to match the consistency and toughness of butyl rubber.
Crossover
A high-quality listening experience will also depend on a well-designed crossover. The crossover essentially divides the many speakers’ frequency ranges and channels each driver with the best frequencies to generate the best sound.
In our opinion, the CERWIN VEGA V468 speaker uses and employs high-quality materials the best. Despite its mid-range pricing, this clever speaker uses a number of high-end parts and produces very high-quality sound.
Dual Speakers
The tweeter of a two-way speaker is coaxially positioned on the woofer. These are among the least expensive choices for automobile speakers. The crossover is simpler and less difficult to design. The midrange definition and clarity of these speakers might not be as good as those of more intricate speaker configurations.
Tri-Panel Speakers
A mid-driver and a tweeter positioned on the woofer make up a three-way speaker. The crossover is more intricate and challenging to construct because of this. The mids will be more clearly delineated if the crossover is executed correctly. The singing or spoken voice will be more audible.
Multiple Speakers
A mid-driver, two tweeters, and a woofer are positioned on a four-way speaker. This has the same benefits and drawbacks as a three-way speaker but can also create greater high-end sound.
All other factors being equal, a speaker system with more drivers will create a wider range of sound and, thus, higher sound quality. But the reality is that nothing is ever that easy. A two-speaker system is frequently preferable to a four-speaker setup. This is entirely due to the high quality of the before discussed design and components.
Integrated Speakers
The drivers of a component speaker system are installed separately and spaced apart from one another. Typically, component systems have two or three different sized drivers. To create the ideal soundscape, component speakers can be readily adjusted and installed anywhere in the vehicle.
These automotive speaker systems are typically the most expensive and best sounding. We only looked at one component system, the Kicker 40CSS684. One of the top 68 speakers we examined, it was also the priciest.
Frequency Response
Excellent frequency response is produced by the finest 68 speakers. The range your speakers cover as well as the build quality of your speakers are essential for experiencing amazing sound. Making ensuring your speakers can get as close to the two extremes as they can is your greatest hope for unlocking audio you have never heard before because the human audible frequency range is between 20Hz and 20kHz.
Full-range speakers are those that can reproduce sound across the entire auditory spectrum [1]. Although full-range speakers are a little more expensive, they are great options for realistic sound.
If you intend to connect your speakers to an amplifier, the frequency response is also crucial. For instance, a built-in crossover will make sure to assign the appropriate frequencies to the appropriate drivers. Our audio specialists advise searching for a disguised integrated crossover.
Intensity and Resistance
Speaker sensitivity ratings and loudness are directly related. It describes how effectively your speakers can transform power into volume. Although sensitivity ratings of around 88dB are quite typical, our sound engineers always advise 90 or higher. Fortunately, 68 speakers typically go above 90dB.
The term “impedance” describes the speaker’s resistance to electrical current. Or to put it another way, it’s how simple it is to power your speakers. There are three common impedance ratings: 2, 4, and 8 ohms. Your speaker is more effective the lower the impedance.
Material
The performance and durability of your 68 automobile speakers are also significantly influenced by their structure. You must consider the speaker’s entire design in addition to the components utilized to make the drivers.
For long-lasting use, you want the strongest materials possible, but you also want to make sure that the materials don’t obstruct sound production. Consider a silk dome speaker as an illustration. The optimum tweeter for a frequency response with a larger dispersion is a silk dome model.
Polypropylene is a strong material that provides sufficient airflow, sound dispersion, and excursion for woofer cones. For durability, our sound team advises using a rubber surround, however foam surrounds are more portable and less expensive.
Numerous speakers on our list, as well as speakers like Infinity, Pioneer, Rockford Fosgate, and even Alpine, give customers a wide variety of material options. Your decision will affect the speaker’s longevity in addition to how well the sound is produced.
Speakers: Component vs. Coaxial
You must choose between coaxial and component speakers in addition to thinking about 2- or 3-way speakers.
One speaker may contain drivers for many uses in a coaxial speaker, which is kind of like an all-in-one design. The majority of 68 speakers are coaxial and equipped with cones for the highs, mids, and lows. Speakers that are a component of a bigger system are called component speakers.
A comprehensive system requires several different types of drivers, of which a component speaker is simply one. Which is better, then? That solely relies on your preferences.
Comparatively speaking, component speakers sound better but are more difficult to install. On the other side, they do allow you to customize your EQ and placement more. Installing coaxial speakers is simple and doesn’t involve mixing and matching different parts.
Compatibility
All of the aforementioned are irrelevant if your speakers are inappropriate for your car. Fortunately, most 68 speakers are designed to be installed quickly. The effort required to fit them inside your automobile door will be negligible. As we previously stated, installing coaxial speakers is simpler.
Beginners and those who don’t want to invest a lot of time in their sound system should choose this sort of speaker, according to our qualified staff. Our sound specialists would advise using the component speakers for a better sound that seasoned audiophiles would appreciate.
Additionally, you need to be sure that the speakers you want will work well in your vehicle. To ensure that your new car speakers won’t require a professional installation, determine the size of the speaker cutouts. In addition to being simple to install in your automobile, the user manual ought to have precise, detailed instructions on how to set things up.
To help with the process, perhaps your speakers will come with the mounting hardware, required wiring, and grilles.
Price
The fact that 68 speakers are typically inexpensive is another really fortunate feature. There are really affordable options that don’t even cost $50, and they rarely go over a couple hundred dollars! Find the right 68 speaker for you by considering your set spending limit, the sound quality you desire, and the added features.
Remember that less expensive speakers run the risk of blowing out more quickly and generating subpar sound. This isn’t always the case, which is why our professionals created the buyer’s guide to aid you in spotting inferior goods.