Music isn’t just heard; it’s also felt. Your car’s subwoofers, not the typical radio speakers, provide the rumble you hear from deep bass frequencies. Subwoofers are loudspeakers that reproduce low-pitched audio frequencies, particularly bass music and sub-bass. A subwoofer system is the ideal way to go if you’re searching for that window-rattling, ground-shaking sound from your music. We’ve compiled a list of the top subwoofers currently on the market.
Before you begin wiring your subwoofer in a DIY audio installation, make sure you know how much power the car audio system requires. Always consider a subwoofer’s amperage requirements and double-check that your subwoofer’s amp can handle them.
Rockford Fosgate P300-12 Punch 300 Watt Powered Loaded 12-Inch Subwoofer Enclosure
- The Punch P300-12 is a self-contained all-in-one solution featuring a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty...
- The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving – Dimensions (Wedge H x W x...
- Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass EQ, built-in 0°/180° phase switch and Remote bass level control...
Rockford Fosgate is a US firm that has created a name for itself in car audio systems and car audio subwoofers, particularly speaker design and subwoofer design, after merging with another electronics company in 1986. All of the equipment is designed in the United States and built in Asia.
This wedge-shaped speaker cabinet is built of 5/8″ MDF fiberboard and is 15 by 20 by 11 inches. The shape allows it to fit in most locations, with its largest depth of 11 inches. An industrial vinyl has been used to cover the cabinet. It is a self-contained, fully functional unit. Everything is pre-installed. It boasts a powerful amplifier with a peak power of 600 watts and an RMS output of 300 watts.
It contains a remote bass volume control and a built-in bass EQ audio quality. The low pass crossover at 12dB/Octave is customizable, letting you to pass through the frequencies you wish. A closed-loop design is used to obtain the best level of performance. This guarantees that the speaker and amplifier inside the enclosure are in sync.
Because of its user-controlled features and ease of installation, the Punch 300 made our list. A 300-watt amp, an adjustable low pass crossover, bass equalizer, phase switch, and a remote control for the bass volume power this loudspeaker. It’s as simple as putting the system in the trunk and connecting it in. Although this product has a lot of extra capabilities, we believe that for the price, some buyers would be better suited with a simpler, less expensive model. This is the Best Car Subwoofer in 2023.
Rockville RW10CA 10″ 800 Watt Slim Low Profile Active Powered Car Subwoofer Sub
- Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
- 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
The RW10CA is an all-in-one solution that provides outstanding sounding bass without taking up a lot of space in your vehicle. This sub enclosure is only 2.7″ thick, allowing it to fit beneath your seat with ease. Because the amplifier is built-in, installation and wiring are simple and straightforward.
Th entertainment system installation as simple as possible, so we developed this device from the ground up with the user in mind. We added high-level inputs so you can turn the unit on and off without using a remote wire from your receiver. The clever circuit will detect the presence of an audio signal and switch on your radio if one is present. The amplifier included into this subwoofer system will automatically switch off when you turn off your audio signal. Because you don’t have to remove the receiver, using the high level input is also the quickest and easiest way to install an aftermarket amp subwoofer system. You simply connect one of your speakers to the high-level input. We also made installation easier by putting all of the inputs and outputs on one side. This simplifies and neatens the wiring process. Our competitors’ models are more difficult to set up.
The RW10CA has a peak output of 800 watts and an RMS power of 200 watts. This model is CEA-2006 compliant, which means that the ratings have been certified by a third party, ensuring that it will provide the power it claims. This is one of the few CEA-compliant slim underseat submarines on the market. Don’t be deceived by other companies’ phony power ratings that don’t adhere to any industry standard. Even if another unit claims to have 2000 watts, ours is superior and louder. If you are unhappy with any Rockville product, you may return it for a refund within 30 days of receiving it. We are confident that our items will meet your expectations.
This features fantastic controls that allow you to fine-tune the sound to your preference. It contains a volume level control and a subsonic filter that filters out extremely low frequencies that the human ear cannot hear. A low pass crossover filter, phase control, and bass boost are also included. A remote bass knob and mounting hardware are included. This is the Best Car Subwoofers in 2023.
MTX Audio Terminator Series TNE212D
- 5/8" MDF Construction.Impedance: 2 ohm.Power source type:Corded Electric.Speaker size:12 inches
- Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
- Embroidered Terminator Logo; Impedance: 2Ω
This could be the subwoofer for you if you’re seeking for a subwoofer that will change the sound in your automobile. MTX Audio is a firm based in the United States that specializes in automotive audio systems, particularly subwoofers and speakers. This subwoofer is large and powerful, and it may be one of the highest-quality automobile subwoofers available. With a 5/8″ thick MDF enclosure and aircraft-grade carpet, they’re meant to last. As a result, it’s designed to withstand all of the shocks and shakes it’ll encounter in a car’s boot or trunk.
The Audio Terminator Series TNE212D from MTX is famed for its subwoofers, so it’s no surprise that it made the top of our list. These speakers are equipped with everything: You get two subwoofers in one device, so there’s no need to mount them. Its frequency response ranges from 10Hz to 150Hz. Two 12-inch subwoofers are housed inside the cabinet. Each speaker has an RMS power rating of 200 watts. A two-inch aluminum voice coil is used in the woofer.
To cushion any abrupt vibrations, the sound performance are provided with a rubber surround. Polypropylene is available. Because of a revolutionary design, it will dissipate heat and allow fresh air to circulate around the coil. A powerful subwoofer at an affordable price. It’s built tough, but the speakers aren’t protected by grilles. It’s made by MTX Audio, which is unquestionably one of the greatest automotive subwoofer manufacturers.
It’s simple to install this sub in a trunk and connect it to your amplifier; then it’s ready to rock and roll. Customers have appreciated the bass sound and commented that, while not indestructible, these units are surprisingly durable. The recommended power range for two ohms is 200 to 400 watts RMS. Because some customers have reported getting damaged equipment, test your system before completing any difficult-to-remove installation. This is the Best Car Subwoofer under $100 in 2023.
JL AUDIO Alphasonik Dynamis DCP8 8 inch 1000 Watts 4-Ohm Shallow Mount
No products found.
JL Audio was founded in 1975 in Florida and has since developed from a small shop selling and marketing its speakers’ designs to a global corporation. Some of their items are still constructed and manufactured in the United States. Others are made in other countries.
This is a high-quality woofer that not only provides a clear and powerful bass, but also has a significant impact on the overall audio quality. It has excellent sound quality and is one of the best automobile subwoofers available. Those who are familiar with bass sound will recognize the importance of transient responsiveness. When the sound moves into starts and stops, it is the speaker that starts and ends its function. There is no sound spillage. A bass cabinet or woofer with a good transient response sounds more alive.
This is a great subwoofer with excellent bass sound. It will be necessary to be able to put it in a position with a mounting depth of 6.89 inches. It’s only 22 pounds, so it’s not too hefty. Because it’s a fitted subwoofer, it won’t take up as much room as a cabinet subwoofer. It is not very inexpensive when compared to some of its competitors, but it is nicely constructed. Despite this, it remains one of the greatest automobile subwoofers available. This is the Best Car Subwoofer under $500 in 2023.
Pioneer TS-WX1210A 12″ Sealed Enclosure Active subwoofer with Built-in Amplifier
- 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer...
- Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB
- Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included
To audiophiles, Pioneer requires little introduction. Pioneer was founded in 1938 and has since become one of the most well-known audio companies on the market. They manufacture a wide range of electrical products, the most of which are geared at the home market.
You could say that Pioneer has stepped out of their comfort zone with this subwoofer. It doesn’t seem to notice. They have created a subwoofer that is one of the greatest sounding automobile subwoofers available. A sealed unit cabinet houses a twelve-inch woofer. The cabinet is built of MDF fiberboard and is carpeted on the inside. A-Cellulose fiber cone is used in the speaker. For stability, it includes urethane support.
It’s worth thinking about the frequency range. The frequency range is 20 to 125 Hz. Human hearing has now been reduced to roughly 20Hz. On a piano, the lowest note is 27Hz. On this subwoofer, going any deeper with the bass would be pointless. We weren’t going to hear it. It includes a built-in amp that can deliver 350 watts RMS and 1300 watts peak power. Gain, bass boost level, and bass boost frequency are all controlled on the back of the cabinet.
You might have a lot of loudness but poor sound quality with some setups. With this subwoofer, however, this is not the case. The bass is tight and resonant, with a distinct definition. At times, it might be a little overwhelming. The temptation is to adjust the gain too frequently. It has a big sound and a big cabinet, and it’s a terrific value for money at the pricing range. Not only is it a strong contender for Best Car Subwoofer, but it’s also a strong competitor for Best Car Subwoofer Under $200.
Kenwood KSC-SW11 Compact Powered Enclosed Subwoofer for CAR
No products found.
Some people only need a bass boost to improve the sound of their current system. If that’s what you’re looking for, this subwoofer could be the answer. Kenwood is a well-known manufacturer of high-quality audio equipment. Kenwood is a company that was founded in 1946. It was renamed Trio in 1960, another brand noted for audio quality, but was eventually renamed Kenwood. In 2008, it combined with another audio reproduction behemoth, JVC.
The SW11 is a simple design with no flashing lights or pomp and circumstance. It’s modest, measuring 16.2 by 9.8 by 4.2 inches and weighing only 10 pounds. As a result, it will easily fit under a seat or in the trunk or trunk of a car. It is powered and comes with a remote control, so you don’t need an extra amp. It boasts an 8.25 by 5.15-inch woofer with a distinctive form. There are three controls on the unit: one for crossover and two for volume. A phase switch is also included. It will deliver 150 watts RMS, which is fairly respectable for an under-seat subwoofer.
However, don’t expect a bass boom that will rock your license plate. This subwoofer will not provide it. It’s clean and fits just about everywhere in the vehicle, but does it have a large bass sound? Not at all.
It will boost the bottom end and part of the lower mids, as we stated in the introduction, but that is all. It’s excellent if that’s what you desire. It’s probably not for you if you’re looking for massive, deep bass. It’s an excellent value at this price point, and it could be the greatest tiny space car subwoofer.
KICKER 44DCWC122 12″ 1200W 2 Ohm Complete Subwoofer Bass Package with Loaded Sub Enclosure
Kicker is still situated in Oklahoma, where it was founded in 1973 and produces loud speakers. They currently have a product line with speakers of various power ratings. DSP, amplifiers, and maritime audio equipment are also available. They have a reputation for producing high-quality goods. And as for the speakers, they’re well-made and have a lot of power. This subwoofer is housed in a sturdy cabinet that also houses two speakers. MDF fiberboard was used to make the cabinet. The box’s inside features anti-vibration and strengthening bracing. The box’s corners are rounded for a pleasing appearance, and the unit is finished with a durable grey carpet.
It’s a ported box with slots on the sides and back. It’s a really massive apparatus, measuring approximately 36 by 24 by 18 inches and weighing in at over 60 pounds. Two 12″ speakers with an RMS rating of 600 watts are housed in the cabinet. The maximum power output is 1200 watts. The cones are composed of polypropylene and have a polyurethane stabilizing rim to reduce distortion.
It’s a potentially powerful setup, however the amplifier provided degrades its quality. Because it is underpowered, you will not be able to benefit from the strong speakers. It’s a decent speaker system for the price. It’s a well-crafted and appealing design. It is, however, quite enormous and hefty, so be sure it will fit. However, as previously said, it is let down by its amplifier.
Dual Electronics BP1204
- INCREASED OUTPUT CAPABILITY; specialized tuned port with computer aided design and 2.5” Voice Coils vastly increases output efficiency for your...
- DIGITALLY OPTIMIZED SUBWOOFERS; are carefully crafted for efficient and accurate bass, providing power handling up to 1100 Watts of Peak Power, 600...
- CURVED PLEXIGLASS VIEWING WINDOW; Blue illumiNITE LED's and Brushed Aluminum subwoofer cones create a surreal viewing experience
This subwoofer is built to withstand the elements. It has a sturdy internal design and is composed of MDF fiberboard. The cabinet’s internals have been reinforced. It has a sloping, curving front fascia and a carpeted inside for added protection. It is, however, extremely large, measuring 30 by 14 by 14 inches and weighing 58 pounds, so it is not light. It’s a cabinet with a ported design.
The two 12-inch subwoofers provide a powerful output of 600 watts RMs and 100 watts peak. Brushed aluminum is used to make the cones. These produce a powerful and precise bass tone. A built-in crossover allows you to connect easily to your car stereo and employ a number of arrangements. 30Hz to 200Hz is the frequency response. The sound quality is enhanced by the use of two 2.5″ voice coils. The ventilation system maintains it cool to guarantee that the performance level does not degrade over time.
Earlier, we mentioned light shows. The container has a curved front that is made of Plexi-glass. A viewing window is created as a result of this. There is a mirrored interior on the inside. The blue light from the IllumiNITE lighting reflects around the inside of the cabinet. This also reflects off the aluminum cones of the car speakers, creating a spectacular display that will illuminate your vehicle.
This could provide you an advantage over your competitors. You may argue that the lighting takes precedence over the sound in the design. You might be correct. Other systems will produce a higher-quality sound with more bass. This subwoofer, on the other hand, is unique. It also comes at a very reasonable price.
JBL Basspro Micro – Dockable Powered subwoofer System
- Deep, powerful bass with power output of 140W RMS with Bass Boost ranging from 0dB to plus9dB at65 Hz
- Dimensions ( L x W x H): 16-3 16 x 7 x 10-7 8 (411mm x 177mm x 275mm)
- Frequency Response 35 - 120Hz
It’s made of plastic and measures 7 by 16 by 10 inches, weighing only 18 pounds. It boasts an 8-inch woofer with a built-in Class D amp and can deliver up to 140 watts RMS. It’s equipped with RCA adapters, allowing you to connect a number of these subwoofers together.
It includes a durable cloth over the grille and a sophisticated design with a black finish and chrome accent. It does have an intriguing design. The amplifier serves as the foundation for the subwoofer, which is permanently attached. If necessary, the BassPro Micro can also be readily detached. Simply unclip it if you require additional room. It’s a clever and practical concept. It should fit inside most automobiles with the amp as the center fastening point. The woofer is removable due to its small size, which is extremely convenient.
The negative is that the size of the box will limit the bass’s range and depth. Bass requires a certain amount of room to function, and lower sizes result in a loss of depth. It is, however, a good idea to have a detachable subwoofer size, even though the power of its bass reproduction will not win any awards. It is not cost-effective pricing; in fact, it is pretty costly for what it is. The build quality is JBL, but there isn’t a lot of JBL bass lovers.
Orion HCCA122 12″ HCCA Series 2 5000W DVC Subwoofer
- HCCA122 Diameter: 12"
- RMS Power Watts 2500
- Nominal Power Watts 5000
You’ve found it if you’re seeking for a subwoofer with enough power to generate a lot of noise. The Orion HCCA 12 is an absolute beast. It will produce a terrifying 5000 watts of power at 2500 RMS. For a car subwoofer, that’s a lot of volume. It has to be one of the most powerful subwoofers currently available.
It’s not only powerful, but it also sounds good. It has a quality bass tone. It offers excellent audio quality, which is crisp and clear. A redesigned cooling system for the voice coil contributes to the sound quality. This new technique aids with temperature regulation while maintaining good audio. It may be one of the greatest deep bass vehicle subwoofers because the bass sound is quite low frequencies.
The rubber surround on the 12″ speaker allows for some movement. It also absorbs some of the beast’s undesirable surplus energy. It has a polypropylene cone that is extremely long-lasting. It is designed to fit into a space in your car’s boot or trunk. It will require a six-inch depth, and the speaker itself is 12 by 12.5 by 6.5 inches deep and weighs a whopping 68 pounds. There is no such thing as a lightweight.
Some automotive subwoofers, like this one, are meant to be installed in the vehicle. Some folks, on the other hand, want the woofer but in a box. This is feasible, but having one produced is recommended. Either enclosed or ports is good, but it will require a sturdy construction using wood and screws rather than glue. You’ll find fragments of your new cabinet all over the place if the construction is done incorrectly. If you’re looking for this much power, the price point is in the middle, so it’s a decent deal.
Polk Audio MM1 Series 6.5 Inch 300W Coaxial
- Mounting Style NONE
- QTY NONE
- Size NONE
Turn to Polk Audio and the MM1-series of subwoofers when you need a particularly tough subwoofer for a harsh or outdoor location. Polk offers them with twin and single voice coils, and each speaker has been tested for fog, salt, UV, and spray to attain an IP56 ultra-marine grade. These subwoofers will perform in all weather, whether they’re in your boat, truck bed, or on the outside of your motorhome.
The nicest thing about the Polk Audio MM1-series subwoofers, aside from their exceptional endurance, is that they don’t compromise sound quality in the process. To ensure that you feel every note, Polk engineers included high excursion bump motors, a robust poly cone, and Santoprene surrounds. Long-lasting performance is ensured with high-performance Neodymium magnets. A sturdy speaker with integrated fuses and a vented pole and basket structure ensures a strong performance.
The MM1 series from Polk Audio has six subwoofers. Dual and single voice coil applications in 8″, 10″, and 12″ diameters are available. These top-performing outdoor subwoofers are also one of our top budget options due to their easy-to-manage pricing point.