Skip to content

Audiophiles

Best 1000 Watt Amps in 2022

Any music enthusiast would benefit from having a 1000-watt amplifier in their sound system. This car amp can be used to increase the signal of an existing audio system and offers enough of power to drive speakers. Although higher powerful amplifiers are available, most individuals normally don’t need them. Whether you’re listening to music or watching a movie, the sound quality it offers is superb.

The speakers being driven by even the strongest 1000 watt amplifier determine how well they sound. For those who wish to crank up the volume dramatically, this amplifier is perfect because it still provides a crisp, clear sound even at high volumes. It’s a fantastic solution for anyone looking for the best audio experience because it’s durable and simple to use. Therefore, it is a perfect option if you’re seeking for an amplifier that will deliver enough of power and high-quality sound.

Rockford Fosgate Prime

Rockford Fosgate Prime 750 Watt Class D 1 channel Amplifier
  • Tri-stage protection covers thermal, over-current and short circuits.
  • On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
  • Variable crossover 12dB/octave slopes

Look no further if you’re looking for a subwoofer sound quality with reasonably high power. The Prime 750 Watt Class D 1 Channel Amplifier from Rockford Fosgate is ideal for the job. The low-cost option is appropriate for powerful truck and vehicle subwoofers.

The car audio system has four output channels. And now I’ll tell you everything about its power amplifier. At 4 Ohms, you get 250 watts max output, 600 watts at 2 Ohms, and 750 watts at 1 Ohm. However, this 1000-watt amp produced me 900 RMS at 1 Ohm. Moving forward, you can make a variety of alterations. These include functions like as gain, Freq Hz, Punch EQ, and others. For a better experience, the gear also has important crossovers. To summarize, this is the greatest amplifier for car subwoofer in my opinion.

Nothing on the market right now compares to this particular subwoofer control in that category. I’ve tried and tested a lot of different units, so you can trust me when I say that. Isn’t Fosgate a name synonymous with quality? The Rockford Fosgate Prime 750 Watt Class D 1 Channel Amplifier does not disappoint in this regard. Furthermore, the amp’s output is simply incredible. So don’t be astonished if it exceeds your highest hopes. This is the Best 1000 Watt Amp in 2022.

Infinity REF-704A 1000 W Peak (400W RMS) Reference Series 4-Channel Amplifier

Sale
Infinity REF-704A 1000 W Peak (400W RMS) Reference Series 4-Channel Amplifier
  • Max Power1000W Peak
  • Power Output, 2 100W RMS x 4, / Power Output, 4 70W RMS x 4
  • Power Output, 4 Bridged 200W RMS x 2

The Infinity REF-704A is a four-channel class A-B amplifier with a 1000W claimed output. The Infinity REF-704A has a higher actual power output than all of the amps listed above, and it is compatible with sophisticated technologies such as ADAS (Advanced Driver Assistance Systems) and HALOSonic.

REF-704A is clearly one of our favorites in terms of design. The amp is simple and elegant. Only the Infinity logo appears at the top. All of the inputs are located on the left side. Although there are no high-level inputs (just RCA), they do support high-level signals if you use the provided adapter and set the high-level/low-level switch. If you want to daisy chain another amp for the subwoofer, the amp also offers two RCA pre-outs.

There are also two high-pass/low-pass switches, a high-pass dial, a gain dial, and ADAS and HALOSonic inputs on the left side. On the right side, you’ll find all of the speaker connections, as well as the power input, ground input, and two 30A fuses.

The amplifier is simple to install and compact, but you must consider the amount of room available in your vehicle. The Infinity REF-704A measures 14.1 inches long, 7.3 inches wide, and 2.2 inches height. Even though it just has RCA inputs, it can handle both high and low-level signals (they are compatible with both signal types). For daisy chaining, there are two RCA pre-outs. This is the Best 1000 Watt Amps in 2022.

Planet Audio AC1000.2 Anarchy 1000 Watt

Sale
Planet Audio AC1000.2 2 Channel Car Amplifier - 1000 Watts, Full Range, Class A/B, 2-4 Ohm Stable,...
  • 500 W MAX Power @ 2 Ohm x 2 Channels
  • 250 W MAX Power @ 4 Ohm x 2 Channels
  • 1000 W MAX Bridged Power @ 4 Ohm x 1 Channels

The Planet Audio AC1000.2 is a two-channel class A-B vehicle amplifier rated at 1000W. A wired subwoofer level controller, user manual, and 1-year warranty card are included with the amp. The amp measures 10 inches long, 2.6 inches tall, and 9.5 inches broad. It’s not the smallest, but it should fit under your seat just fine.

You won’t need to buy a high to low-level adaptor because the AC1000.2 has both low (RCA) and high-level inputs. Because this is a 2-channel amp, the back panel has two speaker connections. There are also changeable low and high-pass filters on the amp. The low-pass crossover frequency range is 45Hz to 90Hz. The high-pass crossover frequency range is 50Hz to 500Hz.

This amplifier covers the entire audio spectrum. This means you can connect not only speakers but also a subwoofer to it. The Variable Low and High Pass Crossover lets you tailor the sound to your preferences. You have complete control over the signal output in this case. This is a welcome feature that the majority of you will undoubtedly enjoy.

The subwoofer can also be controlled remotely thanks to a connected remote. You don’t have to be concerned with little buttons. The sound can be customized using the remote control. It is a good alternative for anyone seeking for a convenient device because the bass and output can be adjusted.

The amplifier can transition from conduction to non-conduction mode almost instantaneously thanks to the MOSFET power supply. This improves sound production and quality while also lowering distortion. The increased efficiency is a feature that is often overlooked. The short protection built into this amplifier is another fantastic feature. If the amplifier gets too hot or if the speakers connected to it have a short circuit, it will shut down fairly instantaneously. This guarantees that the product will not be damaged.

JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier

No products found.

The first class-D amplifier on this list is the JX1000/1D. Digital amplification is more efficient than analog amplification, allowing for more consistent and cooler results. The JX1000/1D is a monoblock (1-channel) amp that can really bring your 1000W subwoofer to life. You’ll also get mounting screws, high-level input plugs, a user manual, and a 2-year guarantee with the JX1000/1D.

Low-level (RCA) and high-level (speaker level) inputs are located on one end of the speaker. Two RCA outputs allow you to daisy chain another amplifier (in case you want to add two subs to your car speaker system). There’s also an LPF dial, gain dial, subwoofer level controller input, and bass boost knob in addition to the high and low-level inputs.

Large subwoofers can be powered by the JL Audio JX1000/1D Monoblock Class D Car Amplifier. And without exerting much effort! It’s time to start counting. At 2 Ohms, the gear can deliver 1000 watts. 750 watts at 3 Ohms and 500 watts at 4 Ohms follow! And the results were consistent throughout the trial and testing process. Additionally, this amp has a variable bass boost control. The turn-on function is likewise designed to be as efficient as possible.

Low-level (RCA) and high-level (speaker level) inputs are located on one end of the speaker. Two RCA outputs allow you to daisy chain another amplifier (in case you want to add two subs to your car speaker system). There’s also an LPF dial, gain dial, subwoofer level controller input, and bass boost knob in addition to the high and low-level inputs. There are power input, ground input, and speaker terminals on the opposite end. You won’t need an adapter with the JX1000/D because it has both high and low-level inputs. A low-pass crossover filter is also included. The crossover frequency range is 50Hz to 200Hz.

The bass boost option on the amp is centered at 45Hz. The bass can be boosted by up to 12dB. The subwoofer controller has a remote input on the amp, however the remote is optional and not included in the kit.

Pioneer GM-A6704 4-Channel Bridgeable Amplifier with Bass Boost

Sale
Pioneer GM-A6704 4-Channel Bridgeable Amplifier with Bass Boost,Black/red
  • 1000 Watts Max Power
  • Automatic signal sensing and Turn-On
  • Variable high pass filter

In this budget range, the Pioneer GM-A6704 is our top option, not just because it’s built by a respectable company, but also because it can deliver more power than any of the really inexpensive amps. The GM-A6704 is a four-channel class A-B amplifier with a 1000W stated output, however its actual power output falls short of that. A high-level input, mounting screws, a user manual, and a 1-year warranty card are included with the GM-A6704.

The Pioneer is a little bigger than the previous three amps, so consider about the dimensions and how much space you have in your car before ordering. GM-A6704 measures 14 inches long, 8.5 inches broad, and stands 2.4 inches tall. High and low-level inputs, gain knobs (for A and B channels), low-pass and high-pass selectors, input/mode selector (2ch/4ch), high-pass dial (for the A channel), and bass boost for the B channel are all on the left side.

Two 25A fuses, power and ground connectors, and four speaker terminals are located on the right side. You won’t need any adapters because the GM-A6704 has both high-level (speaker level) and low-level (RCA) inputs. Also included is a high-level plug. The low-pass filter (for the A channel) is fixed at 80Hz, whereas the high-pass filter is changeable. The high-pass crossover frequency range is 40 to 500 Hz. The A channel has a bass boost option that can boost the 50Hz frequency by 0dB/6dB/12dB.

BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier

Sale
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock,...
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class...
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely...

The BOSS R1100M is a monoblock class A-B automobile amplifier with a 1100W stated power output. The amplifier is boxy and tiny. It’s black with a BOSS logo lighted on top (it lights up when you turn it on). All of the speaker outputs are on the right, while all of the inputs are on the left. The amp measures 10.4 inches long, 9.1 inches broad, and 2.25 inches height. The amp should be simple to set up and can fit into a variety of places.

The amp includes both high-level and low-level (RCA) inputs, which simplifies setup and removes the need for extra gear (high-pass to low-pass adapter). The R1100M is a monoblock amplifier designed to power an additional subwoofer to be added to your existing speaker system. The R1100M boasts a variable low-pass crossover that lets you choose which frequencies go to the subwoofer. The crossover frequency range is 35Hz to 160Hz. The amp also includes a bass boost capability (0-18dB) and a wired subwoofer level controller that must be connected to the amp and put anywhere in your vehicle.

This monoblock amp provides steady performance with 2-8 speakers and does not allow bridged mode (monoblock amps do not support bridged mode). The amp also incorporates overheat/short protection, which means it will shut down if it becomes too hot or if there is a circuitry problem.