Nothing is more important to a guitarist than their guitar. As a result, any guitarist must protect it from the elements and other sorts of damage. Even if the instrument is a top-of-the-line model made by specialists, environmental factors may compromise its performance. A guitar humidifier is a great device for preventing natural damage caused by the guitar’s storage environment.
Extreme humidity can cause wood to expand or shrink, causing deformation and perhaps damaging your instrument. The best Humidifiers for guitars help to maintain humidity by absorbing or releasing moisture in the air as needed, which is why they’re so important for appropriate guitar storage and maintenance with room humidifier.
Table of Contents
D’Addario Humidifier Humidipak Maintain Kit-Automatic Humidity Control System (PW-HPK-01)
- HUMIDIFICATION SYSTEM: D'Addario Humidipak is the only maintenance-free,...
- PROTECT YOUR GUITAR: Protects your instrument against warping, cracks and...
- TWO WAY HUMIDITY CONTROL: The first two-way humidity control that maintains...
The D’Addario Humidipak Automatic Humidity Control System is for you if you want to avoid all the guesswork and anxiety associated with keeping the optimum humidity level for your guitar.
Humidipak automatically adds or removes moisture to keep your instrument case at an appropriate humidity level of 45 percent to 55 percent relative humidity (RH). It dispenses or absorbs purified water vapor automatically as needed. It doesn’t get any easier than that! The Humidipak’s simplicity and ease are difficult to criticize – it’s virtually impossible to use wrong and provides complete peace of mind.
Check out this D’Addario humidifier kit for a great acoustic guitar humidifier. The Humidipak is a one-of-a-kind “two-way” mechanism that helps to release moisture while also drawing it in as necessary. As a result, the Humidipak is a better hands-free humidifier solution. You must, however, purchase replacement packets – which may be worthwhile for you!
Oasis OH-6 Humidifier for Acoustic Guitars
- FOR YOU: 1x Oasis OH-6 Guitar Humidifier for Case
- YOUR USE: Gives the humidification to your instrument it needs in dry...
- YOUR PERFORMANCE: Designed for guitar cases to maintain humidity inside the...
The Oasis OH-6 is a small humidifier designed to fit inside a guitar case. It comes with a metal strip that secures it to a point near the case’s edge. The OH-6 uses “Humigel” crystals that are packed inside a small tube instead of traditional sponges. This gel performs the same function as sponges, but it is smaller and lasts for about a year before needing to be changed. As the humidifier dries, you can see it shrink, indicating when it needs to be changed.
The in-case Oasis OH-6 humidifier mounts to the inside of your instrument case, making it ideal for ‘in case’ care and hydration. You can attach the OH-6 to a stainless steel strip with adhesive backing or a steel clip using two neodymium magnets (you get both with the humidifier). A 10cc syringe is included to assist you in filling it with water. It’s important to remember that only distilled water should be used, as tap and bottled water contain dissolved minerals that can clog the lining.
With solid body guitars, this plainly does not work. They also require humidity protection, which is why the OH-6 was created. But it isn’t only for guitars. Other stringed instruments are available. If you already have the Oasis OH-1, this can be used in conjunction with it to provide further protection. It’s built in the same style as its predecessor. It has a cylindrical shape and is tiny enough to fit into any portion of your instrument case. It includes a belt-like clip that allows it to be securely fastened where it is needed.
Two magnets are also included. The case’s clip offers the necessary surface area for the magnets to be attached. The magnets are strong enough to attach the OH-6 vertically or horizontally.
Kyser Lifeguard Humidifier – for acoustic guitars
- Preserves the wood on acoustic guitars by keeping conditions at the proper...
- Prevents wood from drying out at cracking
- Fits sound holes 3 3/4" to 4 1/8”
If your classical guitar is valuable to you (of course it is) and deserves to be safeguarded, Kyser Lifeguard is a good option to consider. The design differs from the others in that it covers the full sound hole like a plug rather than dangling through it. This one is made to fit a 3 3/8′′ to 3 3/4′′ classical guitar sound hole, so make sure you measure before you buy.
Kyser is a company based in the United States that produces a variety of accessories for guitars and other stringed instruments. Since their inception in 1974, they have grown to have a global sales network in excess of 70 nations. One of their successful ventures is humidifiers.
Kyser’s Lifeguard humidifier is an example of a unique product. When you first try to use them, they are a little difficult to fit. Inserting them beneath your strings and into the soundhole takes practice. It’s an easy operation once you’ve figured it out. You can watch instructional videos if that will assist. These outline the steps to take in order to achieve a proper fit.
They can be used again and again and will last a long time. They’ll only work with distilled water. Simply submerge them in distilled water and wipe away any surface water on the exterior to rehydrate them. Each refill will last at least three days, if not more, depending on the conditions where you live. One advantage of this humidifier is that it does not require the guitar to be laid horizontally to function properly. Because the humidifier is located in the soundhole, it can be used with a guitar on a stand.
MusicNomad Humitar Acoustic Guitar Humidifier (MN300)
- Long-lasting, low-maintenance acoustic guitar humidifier
- Safely releases moisture evenly to eliminate warping, shrinking, and...
- Innovative Humid-i-Bar sponge holds 10x its weight in water and features...
Music Nomad Humitar goes into your guitar’s soundhole and evenly distributes moisture to prevent warping, shrinking, and cracking, is a popular choice among players.
The Humid-i-Bar sponge is anti-drip and holds 10 times its weight in water. Its simple quick-flip top also allows you to rapidly verify if the sponge is wet or dry. Simply remove the sponge and immerse it in distilled water to rehydrate it, and you’re ready to go. It’s also quite inexpensive in contrast to other options, making it an excellent investment for people on a tight budget.
Simply dampen the sponge, wring out excess water, replace the sponge in its plastic housing, and slip the housing through the strings, and you’re done. One of the main reasons for this humidifier’s good rating is its dependability; it doesn’t break down and performs as expected. Recent reviewers have praised the sponge’s ability to absorb far more water than they had anticipated. Another advantage is that the lid is easy to open, allowing for faster checks, which can save a lot of time when examining many guitars. Those who use humidity monitors remark that the MN300 keeps their hydration levels safe.
There is, however, a little quality-of-life element that aids in the product’s usability. The lid of the MusicNomad MN300 Humitar Acoustic Guitar Humidifier’s plastic case simply pops out, allowing you to inspect the sponge’s condition while it’s still lying in your instrument’s strings. The MN300 also includes anti-dripping sponges, which, while not a major function, do help to prevent water from leaking from your humidifier into your instrument.
D’Addario Acoustic Guitar Humidifier
- PROTECTS GUITARS - Protects your guitar giving humidification during dry...
- FOR SOUNDHOLES - Designed to fit acoustic guitar soundholes and maintain...
- NEVER TOUCHES GUITAR - Suspended by the strings, never touches the guitar...
D’Addario’s acoustic guitar humidifier is another wonderful option for protecting your guitar’s polish without hurting it. The humidifier, like a few others on this list, is suspended by the strings rather than affixed to the guitar body.
This device will allow you to humidify your guitar’s body and neck joint in the driest conditions conceivable, such as while on exhibition or when your guitar will be out of its case for an extended period of time. On the inside, you’ll discover a sponge with a non-drip design that releases moisture evenly and slowly, and you can either replace it or moisten it again if it becomes overused. If you want to keep your instrument safe from cracks, twisted necks, and shrinkage, this is the alternative for you.
With this product, there aren’t many fancy designs or science-based uses. With a container and a sponge, it’s a pretty common design. It isn’t as sophisticated as D’Addario’s Humidipack system in terms of operation, but it isn’t priced the same way. This product is made by Planet Waves, which is part of the D’Addario group and is a well-known brand in this market. D’Addario, on the other hand, requires no introduction to guitarists.
It has a non-drip design and is placed into the soundhole of the guitar. There are no metal or plastic attachments, therefore the instrument will not be scratched or damaged. It works by slowly and evenly releasing moisture while retaining a specific amount. You’ll notice that it doesn’t need to be refilled as frequently as some other items. Unless you happen to live in an extremely hot area.
It’s a simple process to refill when you need to. Simply remove it, wet it, and then replace it. A fantastic little device from a firm that knows their way around a guitar. It’s one of the most cost-effective guitar humidifiers available.
CTOMOA Ultrasonic Cool Mist Humidifier
No products found.
Our humidifier is the only one of its sort on this list, and it was included to demonstrate various methods of humidifying your instruments, such as using a room humidifier. The proprietary noise reduction technology floods your environment with clean, fresh air at only 28dB, ensuring that there will be no disruption wherever you place it.
It has a humidistat built in, which is a little electronic device that functions similarly to a thermostat but measures and responds to the humidity levels in your room. This product is a terrific alternative to traditional guitar humidifiers because it allows you to humidify many guitars at once, which is especially useful if your instruments are hung on the wall.
Apart from that, it can clearly be used as a home humidifier to make your home more comfortable, pleasant, refreshing, and healthy. The humidifier’s real measurements are 14.21 x 10.55 x 8.1 inches.
Herco HE360 Guitar Humidifier
- Product Type: Instrument Parts And Accessories
- Package Quantity: 1
- Country Of Origin: United States
Herco bills it as a “total care system,” and that is exactly what this useful item is. It makes use of a natural clay blend to help keep your instrument moist and prevent it from drying out or cracking. It’s also quite simple to use. After soaking the product for around 5 minutes, it’s ready to use. This just needs to be done once or twice a month. It will be determined by the demands placed on the humidifier as a result of the dryness of the air around it.
It has a decent longevity as well, as long as you keep an eye on it and re-soak it on a regular basis. It’s a small enough size to fit inside most gig bags. We think it’s a good idea to get two or three at a time because it’s so cheap. As a result, you can use them in a variety of locations to totally cover your instrument. It’s important to remember that not only the body woods are subject to drying out. It is a very low-cost product that is extremely effective. Because of the inexpensive price, you may acquire a couple of them and boost the overall protection for your guitar.
Frequently Asked Questions
What is a Guitar Humidifier?
A guitar humidifier is a device that distributes water vapor evenly inside your guitar case, and in certain cases, into the guitar itself. The type of humidifier will determine how it accomplishes this.
In most cases, they will be made of a porous substance that will either arrive ready to use or will require moisture to be added to it. Some humidifiers employ a dampened sponge to create a sponge-like consistency, while others use a different material. Many are made of natural materials, while others are constructed of synthetic materials. Some producers, for example, use clay or salts, while others use more complex composites that have been created in a lab to have qualities that are specifically suited for use as a guitar humidifier. Jellies, crystals, and beads are examples of these. Some are made of materials that have a high level of absorbency and water retention. It’s amazing how much technology goes into a product that appears to be so simple!
The porous component is then placed in a container that differs from one product to the next. The presence of this component prevents water from getting into touch with the device. Then it may generate a completely humidified environment within your guitar box safely. Some humidifiers function well when mounted on stands, but you should use them in a sealed environment. Guitars should always be stored in cases, as leaving them on stands increases the risk of them being knocked over and destroyed.
Do I need a Guitar Humidifier?
The answer is ‘yes’ unless you reside in a region with a consistent, balanced humidity level. Naturally, we have little control over the weather or climate in which we reside. We can, however, educate ourselves on how these environmental conditions may affect our prized instruments. After researching your area and determining the humidity levels, you may select a humidifier that will maintain your instrument in perfect condition. If you don’t maintain your guitar in the best possible condition, it will surely warp, swell, bend, crack, and separate joints or layers.
How to use a Guitar Humidifier?
Even though guitar humidifiers work in a variety of ways, they are usually always straightforward to operate. You’ll find a concise overview of how to install each humidifier in our evaluations, as well as how to check the moisture levels so you know when to replace them or add more water to them. Most competitive brands have designed humidification systems that take very little effort from consumers, as most customers prefer something simple.
If the product isn’t damp when it arrives, your first task will be to moisten it. To avoid mold and other bacterial build-up inside the humidifier, which could spread to your guitar, you should use distilled water. It may be as simple as removing the sponge and soaking it in water if it is removable. If you need to use a syringe – which will be provided – to introduce the water through an access point, this step will be the most fiddly.
After filling the humidifier’s sponge, it must be placed inside the enclosure, which is either a plastic pod or a breathable fabric pouch. The humidifier is usually hung between the strings in the center of your soundhole, as this is the best location for providing the most level and broad distribution of moisture. To avoid stretching the strings, some people will sit below or above the strings in the open space.
It’s a product that requires very little upkeep. It’s simple to stay on top of refills as long as you remember to check the moisture levels from time to time.