The Blue Yeti is one of the best USB microphones on the market. They’re made by Blue and are one of the company’s several USB alternatives. It’s also one of the most well-known. It works well for recording voice-overs, podcasts, and interviews. There are no issues with its construction. It’s a well-made microphone that’s both durable and stable. It is fashionable and appealing. If it has a flaw, though, it is the stand.
The stand is also quite stable, which might be advantageous in some situations. It can, however, have a negative impact on the recording. With that in mind, I’ve compiled a list of the top Blue Yeti Microphone stands available right now.
Table of Contents
Heil Sound PL-2T Overhead Broadcast Boom
- Eliminate Noise - The PL 2T mic boom arm offers preset internal spring tension that provides silent movement during recordings.
- Podcast - The PL 2T boom arm mic stand keeps your microphone in the same spot at all times to enhance your podcast sound.
- Video Podcasting - Designed to eliminate velcro straps, the PL 2T is a professional-quality microphone boom arm that enhances aesthetic appeal.
Internal springs in the Heil Sound PL-2T mount studio microphone boom give the optimal balance for this microphone stand. It eliminates the ugly mechanical outboard springs commonly found in lower-quality booms. The Heil Sound PL-2T is capable of handling microphones weighing up to 3.5 pounds. To thread the cable into the boom, you’ll need to remove the back and top plates. Connectors are not used in this process. They are an Illinois-based corporation that was founded in 1966 by Bob Heil. They make microphones and other attachments as well, so they should know what makes a decent stand.
The tube style broadcast boom is stable thanks to its all-metal construction, and the springs we stated provide the proper balance. On the top and back of the design are removable plates. This allows you to thread the mic cord through. It can support up to three and a half pounds of weight. It is then not a problem to keep the Blue Yeti stable and in a fixed position. It’ll need a 5/8″ thread. A conventional C-clamp mount is included with the Heil Sound PL-2T. The PL-2 accepts mic shock mounts or clips with a 5/8″ thread. Depending on the type of shock mount or microphone used, the chrome threaded stem can be simply secured into position.
The mounting system is a normal C-clamp, which could be considered a flaw. The clamp is an optional item that is not included with the stand. And, while the mic will be held securely by the stand, the connection to the table or surface is only as secure as the connection to the table or surface. The clamp secures the stand to a table, but it is not as secure as some others. Furthermore, because the clamp is unpadded, it may scrape any surface to which it is fastened. You can add your own padding, but the clamp will move around on the surface as a result.
The price isn’t the cheapest, and we’re still not persuaded about the fit. The boom arm is well-designed and performs admirably. The clamp, on the other hand, is a different story. This is the Best Blue Yeti Microphone Stand in 2023.
Rode PSA1 Desk-mounted Broadcast Microphone Boom Arm (PSA1Roded1)
- Broadcast-style Professional Studio Desk Boom Arm with Stard Microphone Threading
- Over 3' Hizontal Vertical Reach
- 360-degree Rotation
The Rode PSA1 Swivel mount is well-known as one of Blue Yeti Mic’s most popular boom arms. The RODE PSA1 boom arm’s body is comprised of metal, making it incredibly substantial and durable. It can also handle microphones weighing between 1.5 and 2.4 pounds. A shock mount and a pop filter, in my opinion, are required if you want to find a boom arm stand that can hold the 1.2 pound Blue Yeti mic. This RODE PSA1 boom arm is better suited to this type of weight handling application. It also includes a threaded screw converter that goes from 3/8 to 5/8 inch. It also works with the Blue Yeti Mount hole. To attach the PSA1 mic stand to the Blue Yeti Mount hole, you’ll need to utilize the included “3/8 to 5/8” adaptor.
Rode is an Australian firm that makes microphone stands. They’re known for producing high-quality microphones and accessories. But, more crucially, they create goods that are tough and durable. A crucial aspect of a microphone stand. For Blue Yeti users, the PSA1 is one of the most popular microphone stands.
With the PSA1, you have two desk mounting options: desk-clamp attachment and desk-insert installation. The dual-axis swivel mount is quite beneficial for positioning the microphone around the desk’s corner. The desk-clamp attachment can be installed in desk stand with a thickness of up to 55mm. However, it can be mounted on workstations up to 70mm thick for the desk-insert installation. The PSA1 boom arm can be stretched vertically up to 84cm (33 inches) and horizontally up to 82cm (32 inches). It’s also flexible enough that you can rotate it in a 360-degree range. Also included in the bundle are Velcro cable covers to keep your mic cord organized around the arm.
The PSA1 boom arm has a built-in heavy-duty spring mechanism that is coupled to the joints. As a result, the user can easily adjust the position of the arm, and it will remember where you left it. It also won’t be dragged down by the massive Blue Yeti configurations.
Overall, it is one of the most durable and high-quality boom arm microphone stands available. In fact, I prefer this RODE PSA1 boom arm mic stand over other boom arm mic stands now on the market. This is the Best Blue Yeti Mic Stand in 2023.
Blue Microphones Compass Premium Tube-Style Microphone Broadcast Boom Arm
- Broadcast studio-grade design with enclosed aluminum construction and internal springs.
- Hidden channel cable management system for sophisticated on-camera looks.
- Hand-tightened friction hinges for smooth, quiet operation.
Internal springs and a built-in cable system distinguish the Blue Compass as a luxury tube-styled desktop boom arm. Broadcasting, game streaming, voice-over productions, and podcasting are just a few of the applications for this boom arm. Because of its cutting-edge design, it gives a great service. It can also be used with any microphone weighing less than 2.4 pounds. It works well with both Black Spart SL and Blue Yeti. It also includes a 20-foot XLR wire and a pop filter.
The Blue Compass is a brand-new product from Blue, and it’s the company’s first boom arm. It is unquestionably of great quality, with cleverly hidden cable management. It also has amazing hand-tightened springs and can rotate 360 degrees. It has an aluminum tube-style design that is sturdy and stable. The springs and cabling can then be carefully stored out of the way and out of sight. When using mics in confined places, cable management is critical. It’s all too easy to trip over a cord and knock the mic to the floor. Furthermore, it can support a microphone weighing up to 2.4 pounds and is cleverly constructed for safe clamping to your desk.
They used a clamping technique called a C-clamp. If there is a weak point, it is the clamping system once again. It’s a touch flimsy and could scratch the surface it’s attached to. A twenty-foot XLR cable and a pop filter are included with this stand. Both are quite beneficial additions. It’s also one of the most cost-effective Blue Yeti microphone stands on the market.
InnoGear Microphone Suspension Mic Clip Adjustable Boom Studio Scissor Arm Stand
- Upgraded Length & Flexible Angle: The boom arm is fully adjustable at 135° back and forth and 180° up and down, having a max reach of 38 inches...
- Built-in Springs & Premium Appearance: This heavy-duty mic arm features strong internal springs for strengthening its lifespan and bringing an upscale...
- Enhanced Load-bearing & Sturdy Material: Made of high-quality steel, the thickness of its microphone arm tube is improved from 0.39 inches to 0.53...
The InnoGear Microphone Suspension Mic Stand is an updated desk mount with anti-scratch pad technology and a wider mouth that fits comfortably into a 2-inch-thick surface. It has a 1.1′′ microphone clip that is suited for a variety of purposes including broadcasting, stage, studio, and even family use.
This is a microphone stand that works with many of the Blue USB products. The Snowball, Yeti, and Yeti Nano are among them. Because it is made entirely of metal and has steel tubed arms that are half an inch thick, it is extremely stable. It has a high load-bearing capacity of up to four and a half pounds as a result of this. A spring-balanced mechanism is put in to provide lots of secure movement for getting into the ideal posture. The cabling is concealed inside the arm and is not visible. It comes with a 5/8-inch thread connector for attaching the microphone.
The male and female threaded screw adapter can be used to connect your Blue Snowball and Blue Yeti. It’s worth noting that the Yeti mic’s mounting hole is occasionally a trifle larger than the industry standard of 5/8′′, necessitating the usage of thread tape to wrap around the mounting screw for proper mounting of the Blue Yeti mic.
This boom stand is composed of heavy-duty steel and is extremely light. It is simple to position and move from one location to the next. It also contains rubber feet, which reduce vibration and add to the stand’s protection and stability. Finally, it contains a robust spring and an extra placement screw for securing a heavy-duty microphone.
There are two ways to mount the device. A standard desk clamp as well as a desk-insert attachment are available. It’s simple to remove the mic from your desk. It will fit on any desk with a lip of more than two inches. All of this combines to make it one of the best desk-mounted BlueYeti microphone stands available.
Gator Frameworks Short Weighted Base Microphone Stand with Telescopic Boom Arm
- Frameworks telescoping boom mic stand for bass drums, guitar amps and desktop recording
- Length and angle independently adjustable with cable management included
- Heavy duty steel construction with black powder coat finish and 10 lbs. base
It has a heavy-duty steel frame and a small weighted base. Because of its low stature, it can work with mic sources that are closer to the ground without difficulty. The stand accommodates both European and American microphone chips and has wire management clips. A no-slip vibration gasket is also provided to keep rumbling noise out of the signal. Close-mic sources are easily covered by the 18-inch single-section boom.
The boom arm mic stand and the low-profile kick drum are both stabilized and balanced by the weighted and strong base. For improved sound quality, the base includes a vibration-reducing, no-slip gasket.
The height can be simply adjusted with a quarter-turn of the softly grasped and ergonomic twist clutch. The comfortable texture and shape ensure a secure grip for both the active user and any guests who may be sharing the mic. This stand can be adjusted to a maximum height of 23′′ and is composed of heavy-duty steel with soft rubber adjustment knobs for added comfort when tightening and loosening.
The foundation is composed of heavy-duty steel and is 4.5′′ by 8′′. This will provide it stability and proper balance, ensuring that it does not topple over. Because of its small size, it has the potential to be used for more than just a desk mic stand. We’ll have a look at it later. It incorporates a non-slip vibration gasket to prevent any rumbling sounds from occurring between the base and the desk. The integrated cable management is also a plus. As a result, undesirable cords are kept out of the way.
Soft rubber knobs are used to control the position of the short arm. It’s now easy to grip and turn them. That functionality isn’t common, but it’s a great touch. A quarter turn is all it takes to make such modifications. The stand is balanced and stable when fully extended. The stand will not collapse over, even if the Yeti weighs little over one pound. Single-section boom arms are preferred by some because they are easy to adjust. That is most definitely the case with this stand.
This stand, in my opinion, is ideal for amplifier and drum microphones, but it may also be used as a desktop stand! It can easily hold a Blue Yeti at full extension because it would just take the Yeti to knock it over. Keep in mind that Yeti is only 1.2 pounds.
DISINO Microphone Boom Arm Stand Heavy Duty Adjustable Suspension Scissor
- Premium Quality: This Spring Built-in microphone stand is designed for heavy duty carry, Internal springs for silent and effortless positioning, the...
- Folding Type: With two 13.8"/35cm scissor arm stands, the stand can be extended up to 28"/70cm. Match with the swivel table mount and adjustable mic...
- Stable & Easy Mounting: Comes with one table mounting clamp, an adjustable positioning screw, can easily clip to any desktop up to 3"/7.5cm thick....
The heavy-duty construction of the DISINO Microphone Boom Arm Stand has internal springs for effortless and silent positioning. Its adjustable scissor arm stand is made with electrostatic powder spraying technique on a high-grade steel frame. It is robust and sturdy due to its anti-rust properties.
It has a steel tube frame with springs encased internally, giving it a sleek appearance. It’s a tough material that won’t bend easily. However, before modifying any tightening controls, make sure they’re all loose.
While the boom arms have a nice design, the clamp is a completely other story. It has the appearance of a “vintage” woodworking G-clamp, with an archaic locking control. The appearance appears to be at odds with the sleek steel tubes above it. Nonetheless, it serves its purpose and provides a solid fit. The scissor arm design is fully adjustable and electrostatic powder sprayed. This aids in the anti-rusting process.
It also has a standard 5/8-inch-27 copper thread, which makes it compatible with a wide range of microphones. It can support a load of up to 5 pounds. Furthermore, it is a folding mic stand with two 13.8-inch scissor arms that can be extended to a total length of 28 inches. It also comes with a swivel table mount and an adjustable mic mount, so you can adjust the mic as needed.
The arm of the DISINO Boom Arm Stand bends back and forth smoothly at its base, providing for smooth and stable movement. With its table mounting clamp and adjustable positioning screw, it is simple to install. This mic stand may be easily mounted on any 3-inch thick desktop. In addition, the table mount has an anti-scratch rubber pad for maximum desktop protection. This mic stand can be used in a studio, a stage, a broadcasting desk, a store, a TV station, a combat station, a restaurant, and so on.
Blue Yeti Microphone Stand Buying Guide
Finding the right stand for your Blue Yeti microphone could mean the difference between an average and an excellent audio recording experience. Here’s a comprehensive buying guide to help you make the right pick.
Stability
One of the primary functions of a microphone stand is to provide a stable platform for your microphone. When considering stability, look for a stand with a robust base. Weighted bases offer excellent stability, reducing the risk of the stand tipping over during use. Stands with secure clamping systems also provide good stability, particularly for those who prefer to mount their microphone on a table or desk edge.
Flexibility
Flexibility in a microphone stand refers to the ease with which you can adjust the microphone’s position, height, and angle. This feature is particularly important when multiple people are using the microphone or when you need to reposition the microphone frequently during a recording session. Stands with boom arms are great for flexibility, allowing for a full range of positioning options.
Quality and Durability
The overall build quality of the stand is a crucial factor to consider. The stand should be sturdy enough to hold the weight of the Blue Yeti microphone, which is heavier than many other microphones on the market. Metal stands generally offer a higher level of durability and are more capable of bearing weight compared to plastic ones.
Consider the stand’s longevity and how well it can withstand regular use. A stand that might seem like a bargain initially might not be such a good deal if it needs to be replaced frequently.
Noise Isolation
Microphone stands can play a significant role in noise isolation. Some stands come with features like shock mounts or padding to reduce the impact of vibrations and other external noises on the microphone. While these features may not be necessary for all users, they can be particularly useful for those recording in environments where background noise and vibrations are a concern.
Portability
If you travel frequently or need to move your recording setup often, a stand’s weight and ease of assembly become important factors. Lightweight stands that can be easily disassembled and packed are a good choice for people who need to take their setup on the go.
Price
As with any purchase, price is an important consideration. While it’s true that more expensive stands often offer better quality and features, affordable stands can also provide excellent performance. It’s about finding a stand that fits within your budget while still meeting your specific needs. Remember that a higher price tag doesn’t always mean better quality, and a stand that is perfect for someone else might not be the best fit for you.
Compatibility
Lastly, but most importantly, the stand you choose must be compatible with your Blue Yeti microphone. The Blue Yeti microphone uses a standard 5/8 inch mounting system. Therefore, the stand must have a 5/8 inch thread, or come equipped with an adapter that allows it to fit the microphone properly.
Incompatibility could lead to your microphone not fitting securely or damaging the threads on either the microphone or the stand. Always double-check the product specifications to ensure compatibility before making a purchase.
Frequently Asked Questions
Can I use any stand with my Blue Yeti microphone?
No, the stand must have a 5/8 inch mounting hole or come with an adapter to fit the Blue Yeti’s mounting system.
Do I need a shock mount for my Blue Yeti microphone?
While not necessary, a shock mount can significantly reduce vibration noise, resulting in clearer sound quality.
What is a Blue Yeti microphone stand?
A Blue Yeti microphone stand is a device used to hold and position a Blue Yeti microphone. These stands can provide stability, flexibility, and convenience, allowing you to adjust the microphone’s height and angle to suit your needs. They can enhance the sound quality by reducing handling noise and positioning the microphone correctly for optimal audio capture.
Can I use any stand with my Blue Yeti microphone?
Not all stands are compatible with the Blue Yeti microphone. The Blue Yeti has a specific threading size (5/8”), so the stand needs to have the same threading size or require an adapter to fit properly. Also, due to the weight of the Blue Yeti, the stand needs to be sturdy and stable enough to hold it securely.
What are some good stands for the Blue Yeti microphone?
Some popular stands for the Blue Yeti microphone include the Heil Sound PL-2T Overhead Broadcast Boom, Heil Sound SB-2 Small Microphone Boom Arm, and the Heil Sound FL-2 Flange Mount. These stands are known for their durability, stability, and flexibility.
How can I attach my Blue Yeti microphone to a stand?
To attach a Blue Yeti microphone to a stand, you typically unscrew the side knobs of the microphone to detach it from its original stand, then screw it onto the new stand. Some stands might require an adapter to fit the Blue Yeti’s threading size.
Do I need a shock mount for my Blue Yeti microphone stand?
While not absolutely necessary, a shock mount can be a great addition to your Blue Yeti microphone stand. A shock mount isolates the microphone from physical vibrations and handling noise, which can significantly improve sound quality.
Can a microphone stand improve the sound quality of my Blue Yeti microphone?
Yes, a microphone stand can enhance the sound quality of your Blue Yeti microphone. By allowing you to position the microphone optimally, a stand can help capture better sound. Additionally, a stand can reduce handling noise, and when used with a shock mount, it can also minimize vibration noise.