Alpine is a well-known brand in the automotive audio industry. A pair of high-quality Alpine speakers may completely transform the sound system in your vehicle and set it apart from the factory speakers. We look at some of the greatest Alpine speakers available in our shopping guide.
The first form of a car audio system, the in-car tape player, was offered to the public in 1965. It was created by Ford and Motorola and was first deployed in Ford cars in 1966. Car audio systems have come a long way since then, without a doubt.
Consider adding Alpine car speakers if you’re dissatisfied with the sound quality of your vehicle’s music system. Since 1967, Alpine Electronics, a Japanese manufacturer of automobile audio systems, has been creating sound systems. We’ve compiled a comprehensive selection of the top Alpine speakers in our comprehensive guide.
Alpine R-Series 6.5 Inch 300 Watt Coaxial 2-Way Car Audio Speakers
- 6.5” 2-way car speakers (pair)
- Hybrid fiber woofer with multi-roll rubber surround | 1" silk dome tweeter
- Handles up to 100 watts RMS (300 watts peak power)
Up to 100 watts RMS or 300 watts peak output can be handled by these coaxial two-way speakers. They have a sleek and aggressive modern style that will complement the aesthetic of your vehicle. A hybrid fiber woofer with multi-roll rubber surround and a one-inch silk dome tweeter are also included.
Considering their small, they are also capable of delivering a powerful punch. Even though the speakers are only 6.5 inches in diameter, they have a strong bass response. When paired with the correct amp, they also generate incredibly sensitive high tones and a crystal clear sound.
However, there are a few drawbacks to these speakers that you should be aware of. You’ll need a powerful amplifier to enhance the sound throughout the vehicle to get the greatest quality out of these speakers. For a proper fit, you may need to drill several holes while mounting them.
Alpine SPS-517 5″ x 7″ 2-Way Type-S Series Coaxial Car Speaker
No products found.
The Alpine Type-S Series Coaxial Car Speakers have an 88 decibel sensitivity and a peak power of 230 watts. They’re only 5 × 7 inches in size, but they can make enough sound to fill a car. They also run on factory or built-in head unit power and fit into standard speaker positions.
One of the best aspects of these speakers is their affordable price and astounding sound quality. Even though they are at the lowest price point, their frequencies are not reduced or degraded. Each one is crisp and powerful, and they’re also simple to install, which saves you time.
You might be out of luck if you like lower frequencies, pounding drumming, or bass notes. Because these speakers don’t have a lot of bass, you’ll need a powerful subwoofer to get those low frequencies. Another issue is that they don’t have a lot of clarity in the mid and high levels.
Alpine S-S65C S-Series 6.5-inch Component 2-Way Speakers
- Features: Component speaker system includes 2 woofers and 2 tweeters, 6-1/2" carbon fiber-reinforced plastic woofer cone with specialized rubber...
For a more precise and clear setup, these Alpine speakers have a component style. These speakers have a one-inch silk dome tweeter and a sturdy carbon-fiber-reinforced plastic woofer cone with customized rubber surround. They also have an RMS power rating of 80 watts and a peak power rating of 240 watts.
As soon as you replace your factory speakers, you’ll notice a significant change. When compared to the stock ones, these provide a considerably cleaner sound with a deeper and throatier bass level. The speakers will remain crystal clear even if the music is turned up loudly.
When it comes to mounting them, you’ll have to source your own hardware. Because the speakers do not come with screws, you may need to drill additional holes to make them fit. If you want more boom in your automobile, you’ll also need to install an amplifier and subwoofer to attain a deeper bass.
Alpine SPS-610C 6-1/2″ Component 2-Way Type-S Speaker System
No products found.
To begin with, it’s important to note that the Alpine S-S65C is a component speaker system. These speakers are nearly identical to their full-range counterparts (Alpine S-S65 – see above) in that they use the same drivers – carbon fiber-reinforced plastic woofer cones with specialized rubber surrounds and 1′′ silk dome tweeters with inline crossovers – and have the same power handling (80 watts RMS), frequency response (70-22,000 Hz), and sensitivity rating as the Alpine S-S65 (88dB).
Alpine’s sound engineers never let you down. The SPS-610C speaker has been tuned for excellent tone definition and range. You’ll notice an immediate boost in sound quality once you attach the speaker to your stock stereo. Connect them to an aftermarket stereo if you prefer loud sound.
The speaker produces accurate bass and crisp midrange tones thanks to a mineral-fortified polypropylene cone. The woofer is kept centered for appropriate cone movement by a robust rubber ring, which reduces sound distortion.
Alpine SPE-6000 6.5″ 2-Way Speakers
No products found.
The Alpine SPE-6000 is a good option if you’re on a tight budget and want a pair of speakers that will do the job without breaking the bank. The Alpine SPE-6000 speakers strike a good compromise between performance and price. They feature 3/4-inch silk dome tweeters and pearl mica-injected polypropylene woofer cones backed by an unique rubber surround, which add up to a level of clarity and richness that factory speakers simply can’t match.
These speakers are powerful enough to provide life to your car audio system and bring out all of the excitement and detail in your music, with 60 watts of continuous output and the potential to handle bursts up to 240 watts. They’ll function with your car audio, but they’ll really shine when paired with a powerful aftermarket receiver or an external amplifier. The Alpine SPE-6000 speakers have a frequency response of 68Hz to 20kHz with an 88.5 dB sensitivity, providing you plenty of range and power.