Skip to content

Audiophiles

How to Untangle Headphone Wires in 2022

When you reach for your headphones, the cables are a complete tangle. You ponder how on earth this could have occurred. There it is, a knotted, tangled mess, even if you haven’t been spinning aimlessly in your computer chair or purposely neglecting them.

More than just a hassle, untangling headphones wires is a chore. It can indicate that your headphones aren’t working properly. They become difficult to manage as they become tangled, twisted, and knotted. The incorrect organization of the wire causes headphones to twist. If you don’t solve it right now, that can become a problem later. So that you never have to worry about headphone wires again, here are ten techniques to untangle them.

Twisted headphone wires can be a major source of pain and bother for such a minor issue, but fortunately, they don’t have to be. In this post, we’ll discuss some helpful hints for straightening up curled-up headphone wires and stopping them from doing so.

Why do headphone wires twist?

The normal wear and tear of headphones can cause the wires to curl or twist. We frequently change the angle or position of our headphones during the day. If we have to leave our workstations, we might set them down, then pick them back up again. When doing this, we occasionally turn them accidentally.

The wires in headphones are not consistently held together, they twist. Copper is typically the material inside the wire, and it can move around and generate knots. The wires may eventually twist together as a result of this action.

The likelihood that your headphones will begin to twist increases as you use them more frequently. Untreated twisted headphone cables might develop into a significant issue. The wire may eventually become worn out from repeated bending and twisting, breaking inside the insulation (plastic). You’ll have to buy new headphones after it happens.

How to straighten out Headphone Wires?

You can straighten curled headphone wires by putting them back in the position they were in when they were first installed, if that makes you feel better. Here are some tips for keeping your headphone wires untangled. Most of the options are affordable or DIY-able, and they are all quite simple to complete.

Run your fingers across the wires

The simplest and oldest method of untangling wires is this one. Just separate them as you move your fingertips over the wire. The tangles should be minimal for this procedure to be effective. Avoid moving too quickly or you risk tightening the knots. Additionally, if you’re having trouble getting your fingers between the wires, try using a pencil or pen to assist you.

Use cable zip ties

To keep your wires organized if you don’t want to purchase a cable caddy, utilize these common household items. Utilizing zip ties or velcro straps is one option. They won’t twist together if you simply loop them around the cord a few times.

This is a simple and affordable method for keeping your cords tidy. Velcro straps are typically available at fabric stores, but zip ties are available at any hardware store.

Use a headphone stand or clamp

It might be worthwhile to spend money on a headphone stand or clamp if you own numerous pairs of headphones. The cords won’t twist together and your headphones will hang straight thanks to this. You can coil up some headphones’ cords and fasten them to the stand because some of them have detachable cables. Your headphones won’t tangle if you store them in this manner, which is a great idea. Headphone stands are available online and at the majority of electronics stores.

Use a cable organizer

You may manage your wires by using a cable organizer. There are many various types of organizers available, but they all hold your cords in position so they don’t tangle together.

Use a hairdryer to heat up the wires

You can use a hairdryer to gently persuade your tangled headphone wires if necessary. The wires, plastic shielding, and delicate metal interiors can be carefully warmed up using a hairdryer on low heat, making them more malleable and manageable.

The wires can be bent or molded back into their native position once they have significantly cooled down and become more usable. In order to operate with rather than against their inherent inclination, it is crucial to pay special attention to it. You prevent heat damage, make sure to maintain the hairdryer on low heat and try not to position the nozzle too close to the cables.