Skip to content

How to break in a Subwoofer?

The process of purchasing your first subwoofer can be exciting. Subwoofers are necessary parts of every audio system. It’s important to balance the bass with other speakers and other parts of the system in addition to having the most bass feasible. Many consumers don’t consider breaking in their subwoofers, which can cause problems with sound quality or, worse yet, damage to the driver. Let’s talk about the consequences of not breaking in a subwoofer and some preventative measures you can take.

You need to understand what it is before looking at how to execute it. Low compliance suspension is used in automotive audio systems. Bass frequencies are uncomfortable to play in this situation. Therefore, there are actions to do to loosen and make flexible its spider components. The woven portion of the unit is really rigid when it is brand-new. It currently displays a high free air resonance. It won’t be able to produce its maximum output without a lot of power. However, if broken in, it has a reduced free air resonance, resulting in a higher output at a low power threshold for the subwoofer.

Do I need to break in a Subwoofer?

You do, you do. In addition to being good practice for your subwoofer’s continual peak performance, failing to do so slightly increases the likelihood that the driver will be damaged and will need to be replaced. Because they break in their subwoofers before shipping them to you, some speaker manufacturers don’t require you to do so. For individuals who lack the time or patience, this method is a good alternative, although generally speaking, breaking in your subwoofer is a good idea.

What happens when you break in a subwoofer?

When using an audio device with a high dynamic movement range, there are a few moving parts (i.e., a subwoofer). The voice coil, which you might think of as an electromagnet that generates movement in the speaker field inside the subwoofer enclosure, is attached to the subwoofer’s cone, which moves back and forth. The surround or suspension keeps everything focused on preventing over-excursion damage (i.e., being pushed too far). These sections use various break-in techniques, but mobility is a feature that they all share.

With adequate time, the subwoofer can generate bass sound with excellent quality and complete adaptability. You may make the suspension mechanism’s parts softer and more malleable by breaking it in. Imagine it as the engine running before you drive your automobile on the freeway. If not broken in, some parts may rattle and make noise (or cause distortion and strange pop noises in your subwoofer); but, if done correctly, everything is operating without harm or mechanical flaws.

How do I break in a Subwoofer?

Everything needs to be connected properly before you start playing bass-heavy music; otherwise, the subwoofer might not sound as nice as it could. Make sure the speaker is mounted on a sturdy base and that the airhole and front facing side are not blocked by or situated too close to a wall.

Start off with some music that has a lot of bass at a low or medium volume. You don’t need to play it for days to accomplish this stage, but it will assist the speaker gradually break in. Give it no more than a few hours per day for ten days, or about ten to twenty hours. Additionally, you must make sure that the music is being played at a low to medium volume in order to avoid damaging your speakers. Always keep it safe so that you don’t overload it and break or distort their components.

The speaker that usually causes your neighbors to complain is a subwoofer. The most impactful speaker in a home audio system, but not necessarily being the loudest. As a result, if it is not properly broken in, it can significantly affect the audio experience.

The cone of the subwoofer may get overloaded and damaged if excessive volumes are applied to it too soon. Reputable brands provide high-quality subwoofers; if you buy a new sub, consult the owner’s manual for tips on breaking it in. So the first step should be to play the song you chose for 15 to 30 minutes at a reasonable volume. This serves as the introductory phase before the breaking in.

Select a song with a powerful bass beat, and then loop it repeatedly. There’s no need for a playlist that plays the same song for an entire hour. Just remember that classical music or very quiet music devoid of low-frequency sounds won’t have the same impact. After a few days, you can increase the bass’ volume and leave it on for an hour or two to get greater results. It could be convenient to take the family out to supper or engage in other activities while the music is being played by your subwoofer. And confirm if your neighbors are in agreement.

How long does the break-in period last?

Technically, you’re ready to go as soon as your subwoofer reaches the point of having a full range and good bass response. But depending on the brand and model, this may alter while breaking in subwoofer.

While some businesses advise 10 to 20 hours, others advise 100 or more. Additionally, certain subwoofers don’t need break-in periods because they are made to be used right away, as was indicated at the beginning of this article. But after a few days, you might notice that your subwoofer sounds better.

How to break in a Car Subwoofer?

Good stereo systems don’t just magically work together. The sound can be impacted by a wide range of elements. Without the proper information, the sound your stereo system produces can differ significantly from how it is intended to sound. If your music system isn’t the best, you can create your own subwoofer by using the instructions below. The music you play should be the first thing to take into account when breaking in a subwoofer. The vibration and frequencies that could possibly impact the subwoofer itself are produced by the lower bass notes. To properly break it in, play different kinds of music at various volumes.

Testing out the various levels is the second step you can do to break in your subwoofer. Set the volume to a medium setting, listen for a while, and then turn it up. Additionally, please confirm that the power source is suitable for your subwoofer. It normally takes a few days to break in your automobile because you won’t be playing sounds in it continuously for a whole 12-hour period. The subwoofer may, however, readily be moved to other locations. You’ll have the chance to hear the differences in sound and hasten the process by doing this.