Skip to content


Close this search box.

Best 4×6 Speakers in 2024

Installing a new set of 4×6 speakers into your car’s factory sound system is one of the simplest and most economical methods to improve it. Over the normal set of speakers that came with your car stereo, a new set of speakers will offer a bit more power and sound. There are so many brands and items to choose from that narrowing down the top picks can be difficult. To find the finest speakers for your car, SUV, or truck, read our assessment of 46 speakers below.

Kicker 43DSC460 DS Series 4×6″ 4-Ohm Coaxial Speaker

KICKER DSC460 4x6-Inch (100x160mm) Coaxial...
  • Size: 4x6"
  • Impedance: 4 Ohms
  • Peak Power Handling: 120W

The frequency range of these two-way coaxial speakers is 50-20,000 Hz, and they can handle up to 30 watts RMS and 120 watts peak output. They have a 1/2-inch PEI domed tweeter and a ribbed polyester foam surround on the polypropylene woofer. They have a 4 ohm impedance, 88 dB sensitivity, and a 1-7/8-inch top-mounting depth.

These 2-way 46.5-inch speakers include a stamped-steel chassis, stiff polypropylene cone, and Extended Voice Coil (EVC) technology and are designed to be a simple drop-in solution. The big woofer magnet is housed in a robust duty motor, and the UV-treated poly-foam surround resists heat and direct sunlight. Each speaker features a 1/2′′ PEI tweeter with zero protrusion that won’t interfere with OEM grilles. The speakers have a 50-watt RMS and 150-watt maximum power rating.

These speakers are terrific replacements and a great improvement to your stock system. They’re simple to set up, have good sound quality for their size, and are very clear at high volumes. They have more bass than most stock speakers and create clean highs and smooth mids. The most common criticism of these speakers is that they don’t have a lot of bass. They may also not be as loud as you’d like, and some consumers have reported that the product’s wattage is lower than stated. This is the Best 4×6 Speakers in 2023.

Rockford Fosgate P1462 Punch 4″x 6″ 2-way Full Range Speaker (Pair)

Rockford Fosgate P1462 Punch 4"x 6" 2-way Coaxial...
  • The Punch P1462 is an impressive 2-way full-range speaker designed for...
  • The P1462 4"x6" 4-Ohm black speakers come as a pair, have a power handling...
  • Featuring a PEI dome tweeter with built-in crossover and injection molded...

These 46.5-inch speakers are suitable factory replacements, rated at 35 watts RMS or 70 watts max and providing impressive sound quality. They have a Flex Fit basket for a better fit in automobiles with unusually shaped factory speaker positions. Furthermore, the integrated concealed crossover (ICC) avoids the need for any black boxes to be installed. A PEI dome tweeter on each speaker provides accurate frequency reproduction and strong volume output. A stiff, lightweight, and high-strength injection molded polypropylene cone helps minimize cone flex, improving overall sound quality while decreasing distortion. The impedance of these speakers is 4 ohms, and the frequency response is 90Hz to 22kHz. They require a 1.89′′ mounting depth.

For further stiffness, the P1462’s polypropylene woofer cone is injected with minerals. When adding a rubber surround to the P1462’s woofer cone, Rockford Fosgate employs a technique known as VAST. This raises the cone size by 25%, allowing more ‘air’ and soundwaves to be pushed out. As a result, the P1462’s bass sounds notably “huge,” while still maintaining every last detail. PEI, as a polymer material, produces smooth and nuanced highs as long as the music is played at relatively loud decibels. If you go higher than that, however, you’ll observe the upper frequencies gradually breaking up.

Polk Audio DB461P 4×6-Inch Coaxial Plate-Style Speakers

Polk Audio DB461P 4-by-6-Inch Coaxial Plate-Style...
  • Pair of marine certified speakers perfect for use in boats of all types
  • Equipped with a 0.75 inch liquid cooled silk polymer composite dome tweeter
  • Maximum input power: 150 watts

Mineral-filled polypropylene woofer cones are substantially stiffer than ordinary ones, so you can turn up the volume without worrying about rattling and distortion in the low end. The Polk Audio DB461P, like the Rockford Fosgate P1462, has a built-in crossover, which eliminates any further installation effort.

The tweeter on the Polk Audio DB461P combines the best of both worlds: silk’s smooth, nuanced tone with polymer’s enhanced rigidity. This tweeter’s silk is actually liquid-cooled, enhancing its ability to dissipate heat.

The Polk Audio DB461P has the highest power handling rating of all the speakers on this list (50 watts maximum RMS). However, due to its sensitivity of 91dB, this speaker will perform well with low-powered stereo systems. It doesn’t require a lot of power to be rather loud.

Skar Audio RPX46 150 Watt 2-Way 4″x6″ Coaxial Speaker System

Skar Audio RPX46 150 Watt 2-Way 4"x6" Coaxial...
  • Peak power handling : 150 watts per pair (75 watts each)
  • Microfiber paper cone & butyl rubber surround
  • 20Mm soft dome silk tweeter

The Skar Audio speakers can handle 150 watts per pair of speakers, have a four-ohm impedance, and a sensitivity of 91 decibels. A 20mm metal dome tweeter and a microfibre paper cone are included. They’re well-made, and the sound is rich, clear, and strong. For a 46 speaker, the bass is quite good. For a factory replacement speaker, they are also simple to install. Overall, they appear to be excellent value for money.

You may need to make some adjustments to make them fit correctly in your vehicle. Because they may be larger than certain stock speakers, be sure you have enough clearance. Furthermore, the male terminals are difficult to reach and are so close to the magnet that you may have to bend them out to use them.

Pyle 4 x 6 Three Way Sound Speaker System

Pyle 4'' x 6'' Three Way Sound Speaker System -...
  • TRIAXIAL SPEAKER SYSTEMS: The woofer feature an eye-catching blue poly...
  • LOW IMPEDANCE: Pyle 4 ohm component audio speaker compensates the...
  • MIDRANGE TWEETER: Pyle Pro three way sound speaker system has one-inch...

A one-inch neodymium film dome midrange and a 3/4-inch piezo tweeter are included in this triaxial speaker system. For high temperature and high-wattage settings, it also has a one-inch ASV voice coil. They’re excellent for anyone looking for low-cost, high-quality speakers for their car or truck. They’re well-made, with materials similar to those found in higher-end speakers, and they look, sound, and feel terrific.

The striking blue poly injection cone on these three-way triaxial speakers provides plenty of rigidity without adding weight. They have a 1′′ high temperature ASV voice coil that is suited for high-wattage scenarios and are rated at 120 watts RMS and 240 watts peak. A non-fatiguing butyl rubber casing keeps the speakers in place. The 20-ounce magnet, 1′′ neodymium film dome midrange, and 3/4′′ piezo tweeter all contribute to excellent sound quality. These speakers offer a 4-ohm impedance and a 95Hz to 20kHz frequency response. They require a 1.75′′ mounting depth.

JBL Club 6420 4×6″ 70W RMS Club Series 2-Way Coaxial Car Speakers

JBL Club 6420 4x6" 70W RMS Club Series 2-Way...
  • Power Handling: 70W RMS, 105W peak
  • Sensitivity (@ 2.83V): 91dB
  • Impedance (ohms): 3

These JBL speakers are 3 Ohm and can handle 70W RMS and 105W peak output. They have a sensitivity of 91 decibels, indicating that they are not power hungry. They have a high sensitivity and give superb treble and mid-range. The tweeter is clear and does not cause hearing fatigue even at high volumes. These speakers sound great because to their low impedance, and they can become loud without distortion even when combined with a factory head unit. The lows are pronounced, and the highs are distinct.

One disadvantage is that they need some time to break in and for the bass to become smooth and deep. At first, don’t expect bursting bass and incredibly deep lows. After about a month of use, you should be able to hear the sound you’re looking for. Furthermore, the speaker terminals are a little flimsy, so be careful when installing them. You must also utilize the crossovers provided, or the sound will be poor.

Cerwin-Vega 2-Way Coaxial Speakers

Cerwin Vega HED Series 4"x6" 2-Way Coaxial Car...
  • Powerful and Clear Sound: Experience the perfect blend of loudness and...
  • Extensive Size Options: Choose from a wide range of sizes in the Cerwin...
  • High Power Handling: These speakers offer 30W RMS and a maximum power...

These 4×6 speakers are inexpensive but produce a tremendous sound. Stamped steel vented airflow basket frames, graphite-injected strengthened spun cones, and linear woven treated red spiders are among the features. With black anodized balanced dome tweeters and grilles, they look even better. These speakers are notable for their stage presence. You’ll get clear mids and highs that aren’t distorted. They also include all of the necessary installation hardware.

The disadvantage of these speakers is that they have a deeper mounting depth than the other speakers on this list. This may limit where it can be installed. The deeper bass tones are also missing.

Pioneer 4″ X 6″ 200 Watts Max 3-Way A-Series Car Audio Coaxial Speakers with Carbon and Mica Reinforced IMPP Woofer

Pioneer 4" X 6" 200 Watts Max 3-Way A-Series Car...
  • Handles up to 200W Max power (30W RMS) for rich and powerful sound.
  • Carbon and mica reinforced IMPP woofer
  • High heat resistant wire voice coils

These Pioneer speakers have a four-ohm impedance and can take up to 200 watts of maximum power for a rich and powerful sound. The highs are clear and crisp without being harsh, and the mids are similarly clear with a good amount of bass. The overall sound is balanced and pleasant. They’re quick to respond, work well with the stock head unit, and are simple to install.

These speakers will satisfy individuals who want to hear over the road noise but don’t require earth-shattering bass. Expect no rumbling lows (if you want hard-hitting bass, you’ll need a subwoofer). Also, because they’re a touch power-hungry, you’ll need an extra amplifier to hear their full potential.