When it comes to enhancing your car audio system, a 4-channel car amplifier can be a game-changer. These amplifiers are the workhorses of powered music in cars, providing clean power that fits almost anywhere, without distortion, and with enough power to fill your vehicle with your music sounding the way you want.
Table of Contents
Alpine MRV-F300 4-Channel Car Amplifier, 50 Watts RMS x 4
- 75W RMS X 4 (2Ω , 14. 4V, ≤ 1% THD+N)
- 50W RMS X 4 (4Ω , 14. 4V, ≤ 1% THD+N)
- Same Power In A 40% Smaller Chassis
The Alpine MRV four-channel amplifier takes the top spot on our car audio system list because to its small size, gorgeous brushed metallic finish, and Alpine’s legendary sound quality. It is not only a dependable and well-known brand, but it also comes at a reasonable price. At 2 ohms, this amp provides four 75-watt RMS channels and four 50-watt RMS channels. This device packs a lot of punch into a compact, light container.
The 4 channel car amp produces significantly less noise than you’d expect from a class D amplifier, and the audio quality is far superior to comparable amps in the same price range. Class D amplifiers combine compactness with power efficiency, which is a challenging feat to achieve. However, they are gradually improving, and the Alpine is now one step ahead of the competition. This is the Best 4 Channel Car Amplifier in 2023.
Kenwood KAC-M3004 Compact 4 Channel Digital Amplifier
- PEAK POWER: Max Power 600 Watts. RMS (50 Watts x 4 @ 4-Ohm or 75W x 4 @...
- RMS POWER: (50 Watts x 4 @ 4-Ohm or 75W x 4 @ 2-Ohm. High Quality KENWOOD...
- MARINE CERTIFIED: Conformal coated marine grade circuit board is great for...
The Kenwood KAC is a class D amplifier, which means it’s both cheap and small. It features a four-channel RMS range of 75 watts at 2 ohms and 50 watts at 4 ohms. It has a total power rating of 300 watts, which is more than enough for most people. However, you won’t get the same volume as with higher-powered amps. Because this is a class D amplifier, turning it up too loudly will result in a high signal-to-noise ratio.
When compared to a class A/B amplifier, this means you’ll get more signal noise. However, this is a cost-effective quality amplifier choice that will provide significantly better sound than a normal stereo, albeit without the clarity or decibel-meter-topping volume that a higher-powered amp may provide. This is the Best 4 Channel Car Amplifiers in 2023.
Rockford Fosgate PBR300X4 Punch 300 Watt 4 Channel Boosted Rail Amplifier
- Our ultra-compact (1.53” x 4.25” x 6.75”) Punch PBR300X4 is a...
- Designed to be compact and efficient while providing big power - RMS Power...
- Featuring our Class BR, Rockford Fosgate’s patented Boosted Rail...
The Rockford Fosgate Prime 4-Channel Amplifier is a top-of-the-line audio amplifier for your car. It has a total power output of 300 watts at 4 ohms. It’s also a slim and tiny box that can easily fit beneath a seat or in the trunk of a small car or SUV.
The versatility of this Rockford 300X4 amplifier is one of its best qualities. It has a gain control on both the front and back to make it easier to use. It also has over-current and short-circuit protection, so it won’t let you down while you’re cranking out your favorite cartoons.
The fact that the box is small does not imply that it is light. While 7.5 pounds may not seem like a lot, it may add up quickly when it comes to an amplifier. Another disadvantage is the amp’s cost. It costs more than many of the other amplifiers on the market.
Pioneer GM-A6704 4-Channel Bridgeable Amplifier with Bass Boost
- 4-Channel Class A/B Amp - Upgrade your car audio with a 4-channel amp for...
- Maximum Power Output – Power up your music. The GM-A6704 cranks out an...
- Efficiency – The Pioneer GM-A6704 boasts a Class AB design, balancing...
The lightweight box produces crystal clear sound and powerful music with a maximum power of roughly 1,000 watts. It’s a terrific technique to improve the sound quality of your OEM stereo and hear a lot more than before.
The amp is light and thin, weighing only 4.9 pounds and fitting easily inside your vehicle. It’s perfect for smaller subs under 12 inches in length. It can be tucked away beneath a seat or in the trunk, out of sight. It’s also set at a reasonable price that is neither excessively high nor excessively low.
This amplifier, on the other hand, falls short when it comes to producing a good low-toned bass noise in general. You’ll get some boom, but it won’t compare to the sound of a more powerful amp.
Alpine KTP-445U 4-channel Power Pack Amplifier
No products found.
The Alpine 4-Channel Power Pack Amplifier is a force to be reckoned with. It stands out for a variety of reasons, including its small size and light weight design. This dual combo is ideal for anyone wishing to improve the overall sound quality of their stereo. It has a power rating of roughly 180 watts, which makes it fairly loud.
While being loud is desirable, having crystal clear audio is even more so. When it comes to automobile amplifiers, quality trumps quantity. This one delivers a crisp audio output that allows you to clearly hear all of the high and low frequencies. Another amazing feature of this amplifier is how easy it is to set up and how quickly it can be done.
However, some users have complained that the wiring on non-Alpine head units is difficult to install. It, too, has a larger price tag. It isn’t extremely pricey, but it isn’t inexpensive either. There have also been reports of minor distortion, however this isn’t always the case, and it can get warm after a period of running.
Planet Audio AC1200.4 4 Channel Car Amplifier
- Power - 300 Max x 4 @ 2 Ohms, 150 Max x 4 @ 4 Ohms, 600 Max Bridged x 2 @ 4...
- Full Range - Run your speakers and subwoofers. Bridgeable - Dramatically...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number...
Planet Audio’s 4-Channel Car Amplifier looks amazing, sounds great, and has a maximum power output of 1,200 watts. It has all of the features you’d expect from a car amplifier. It’s also quite sturdy, small, and comes with thermal protection to keep it from overheating.
This is one of the best amplifiers you can find for powering four tiny speakers and tweeters, and it comes at a reasonable price. The amplifier is only 2.4 inches tall and 10 inches broad, making it small enough to fit in a trunk.
It is, however, quite heavy, weighing in at 7.2 pounds, making it one of the heaviest amplifiers. Overtightening the cable connections may potentially cause them to break. Some users have had trouble fitting it under a seat or into a small space.
If you’re looking for a 4-channel amp for around $100 that yet packs a punch, this Planet Audio Anarchy amplifier will deliver.
BOSS Audio Systems R1004 4 Channel Car Amplifier
- Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
- Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of...
- Full Range - With A Full Range Amplifier You Not Only Have The Option To...
The Boss R1004 is the best four-channel automobile amplifier you can get for the money. This jl audio amp packs a punch with four thunderous 100-watt channels at 2 ohms or 50 watts at 4 ohms. It’s a full-range amp, which means you can use it to power both your speakers and subwoofers.
Because it is a class A/B amplifier, it has a lot of current going through it, which translates to a more power. This also means it’s huge – it’s 7.8x 9 inches, which is what keeps it from taking the top slot. This isn’t a problem for power-hungry audiophiles, but in a smaller car, it may be a real pain; ideally, it should be hidden beneath your seat. Even at the somewhat increased price, its tremendous power and well-known Boss quality will not disappoint.
Skar Audio RP-150.4AB 1,000 Watt Full-Range Class A/B 4 Channel Car Amplifier
- 1,000-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
- RMS Power at 2 Ohms: 250 Watts x 4 Channels
- RMS Power at 4 Ohms: 125 Watts x 4 Channels
The Skar RP is a powerful 1,000-watt A/B class amplifier. It has an RMS rating of 250 watts per channel at 2 ohms and 125 watts at 4 ohms. This amp is for those who want to put some serious power behind their speakers.
The Skar features a four-way protective circuitry that prevents your speakers from blowing up if they become too hot. It also boasts a high-quality MOSFET power supply with a reputation for reliability. It’s a bit big, at 724 inches, but that’s to be expected from a class A/B amp. Because of its big size and hefty price, it falls just short of our two top picks.
JBL GX-A604 4-Channel Full Range Amplifier
No products found.
JBL is a well-known audio brand noted for its high-quality products. The GX car amplifier is stylish, with an RMS rating of 60 watts per channel at 4 ohms and 85 watts per channel at 2 ohms. It also contains a low-pass filter and a customizable bass boost.
It makes up for its lack of strength with quality. JBL produces high-quality audio equipment with crystal-clear sound. This amp is great for modest but precise sound, however if you need to attach a subwoofer or seek deep bass frequencies, you may be disappointed.
Frequently Asked Questions
What Is A 4-Channel Amp?
The typical 12V voltage is increased by the amplifier so that the speakers, tweeters, and subwoofers may perform at their best. The 4 channel amplifier, as its name suggests, contains 4 amplification channels. One amp, for instance, can power up two front speakers and two rear speakers.
Many companies offer bridging options in addition to powering 4 speakers, allowing you to include a subwoofer in the mix. Everything depends on the system you employ. In either case, using a 4-channel amplifier to power several speakers is the ideal choice. The key benefit of choosing these over alternatives is that you will get a wide variety of sounds. You can uncover the ideal mids and highs in your favorite tunes with the correct four channel amp, and this is what you want to happen. The best part is that your speakers deliver excellent sound and are relatively affordable.
4 Channel Amp vs 2 Channel Amp what’s the difference?
The bigger sibling of the 2 channel amplifier is the 4 channel amplifier. The 4 channel amp has four channels of amplification as opposed to the 2 channel amp’s two. What is superior? Depending on the system you’re using. A four channel amp would be your best option if you have more than two speakers. The 4 channel option would again be the ideal choice if you just have two and intend to upgrade soon because, if you choose a bridgeable amplifier, you have a wide range of connection possibilities.
Generally speaking, 4 Channel amps are substantially more compact than 2 Channel ones. Two additional channels have to be squeezed in. In case you were wondering, they didn’t just slap two control boards together; instead, they went above and beyond and had it completely redesigned.
What is “bridging” an amplifier?
Bridging an amplifier refers to the process of combining two channels into one to increase the power output. For example, you can bridge the two rear channels of a 4-channel amp together to power a subwoofer, leaving the first two channels for the standard right and left speakers.
What is the difference between “parallel” and “series” wiring?
Parallel wiring refers to connecting two speakers by wiring the positive lead of one speaker to the positive lead of the other, and the same for the negative leads. Series wiring, on the other hand, involves connecting the positive lead of one speaker to the negative lead of the other.
What are the benefits of hooking up 2 subwoofers to a mono amplifier?
Hooking up two subwoofers to a mono amplifier can increase the power handling capacity and provide a more balanced sound distribution.
What is a “high-current” amplifier?
A high-current amplifier is designed to provide a high output current. These amplifiers are typically used to drive low-impedance speakers and subwoofers.
How much power do I need for my subwoofers?
The power you need for your subwoofers depends on their RMS power handling capacity. You’ll want the amp’s top RMS power to be equal to or slightly less than the sub’s top RMS rating.
What should I know about the amplifier’s RMS Wattage?
The RMS rating tells you the amplifier’s maximum constant power output without distortion. It’s best to ignore PEAK ratings as they are typically inaccurate and mostly marketing hype.
What is the Channel-to-Speaker Ratio?
The Channel-to-Speaker Ratio refers to the number of channels you need on your car amplifier, which depends on the number of speakers you have in your car. Generally, you need one channel per speaker.
What is the difference between Class D and Class AB amplifiers?
Class D amplifiers are more efficient than Class AB, can fit in a smaller case, and can rival the audio quality of Class A/AB amplifiers.
What is the role of a 5-channel amplifier?
A 5-channel amplifier is a do-it-all workhorse that is a 4-channel amplifier with a dedicated monoblock sub channel. You can run 4 speakers and the subwoofer, or you can bridge the 4-channel portion and use it as a mega 2-channel amp.